The manufacturer of the Eppendorf Mastercycler Nexus SX1 Thermal Cycleris Eppendorf. Nexus X1 thermal cyclers use less power than traditional Eppendorf Mastercylcer nexus thermal cyclers and use silver blocks instead of aluminum. The Eppendorf Mastercycler SX1 nexus is non gradient thermal cycler with an silver thermal block and 96x 0.2 mL PCR tubes or 77x 0.5 mL PCR tubes or 1x 96 well PCR plate capacity. Featuring a 4-99°C temperature control range, the Mastercyler nexus SX1 thermal cycler is a fast, safe thermal cycler. The Eppendorf Mastercycler nexus SX1 uses peltier elements and triple circuit technology to heat the lid to a range of 37-110°C. The lid also features Eppendorf's flex lid technology for ergonomic lid opening. Block homogeneity ranges from 20-72°C < ±0.3°C, 95°C < ±0.4°C with an accuracy of ≤ ±0.2°C. The Eppendorf Mastercyler nexus thermal cycler has an approximate heating rate of 5°C per second and a cooling rate of 3.5°C (faster than non X1 model) and features USB, Ethernet and CAN in/out interfaces. The product is located in Ramsey, MN, USA.
Specification
Condition: Certified Pre-owned Thermoblock: Sliver Sample capacity: 96x 0.2 mL PCR tubes or 77x 0.5 mL PCR tubes or 1x; 96 well PCR plate Temperature control range: 4-99°C Temperature control mode: Fast, Standard, Safe Heating technology of the block: Peltier Elements, Triple Circuit Technology Gradient: No Lid temperature range: 37-110°C Lid type: Flex lid for ergonomic lid opening Block homogeneity: 20-72°C < ±0.3°C, 95°C < ±0.4°C Block temperature accuracy: ≤ ±0.2°C Heating rate: approx. 5°C/s Cooling rate: approx. 3.5°C/s Interfaces: USB, Ethernet, CAN in/out Power consumption: 700 W Dimensions (w x d x h): 25 x 41.2 x 32.1 cm Weight: 24.7 lb / 11.2 kg
Features
In excellent condition Thoroughly cleaned Fully tested to perform at manufacturer specifications