FiltraLinX Benchtop Semi-Automatic TFF System, TS-CMV-S01 (CAT#: STEM-GLE-0035-ZJF)

The FiltraLinX® Semi-Automatic TFF system features a modular design and is compatible with hollow fiber filters of various specifications, covering filtration areas from 0.017 m² up to 1.1 m². This compact and practical system has a small circulation volume, making it suitable for high-concentration applications.
The system is equipped with a full set of components, including a filtration tank, collection tank, OEM peristaltic pump, four-element diaphragm pump, electric proportional control valve, temperature sensor, pressure sensor, ultrasonic flowmeter, and a semi-automatic control system, to meet diverse experimental requirements.
Through the operation interface, users can optimize the TMP point by adjusting the flow rate, tangential flow, and reflux and permeate pressure. This enables the system to perform concentration, diafiltration, desalination, dealcoholization, and other operations for bioproducts such as antibodies, vaccines, blood products, and gene therapy drugs.
Additional features include data recording, audit trail, permission management, high cost-effectiveness, and compliance with relevant regulatory requirements, making it an ideal choice for laboratory research and development, pilot production, and small-batch Good Manufacturing Practice regulations production.

Pump flow rate: 60 L/h
Compatible membrane area: 0.017-0.035 m²
Pipeline i.d. (mm): 7.75 mm
Control level: Semi-automatic control
Operating pressure: Maximum 5 bar
System pressure resistance: Maximum 6 bar
Operating temperature: 4-60°C
Bracket baseplate: SS 304
Pipeline fittings: SS 304
Diaphragm pump: SS 316L
Electric proportional control valve: SS 316L
Pressure sensor: SS 316L
Surface finish: Polishing for the surface Ra ≤ 1.2 μm, polishing for the part in contact with the product Ra ≤ 0.4 μm
Sanitary connection: TC chuck

Hollow fiber filtration family with consistency and linearity, which can ensure the seamless transition of process scale-up or scale-down;
Various specifications available: 0.017-1.1 m2 hollow fiber filters;
Equipped with the electric proportional control valve, pressure sensor, etc., realizing automatic adjustment of TMP;
Fully functional with data recording, audit trial, permission management, etc.;
Flexible connections, compatible with single-use storage and mixing bags used for the collection of product concentrations;
Equipped with filtration tank, used for the temporary storage of the product concentration, defiltration, harvests and clarifications;
Capable of automatically performing both the water flux test and the filter test;
With high compatibility, compatible with hollow fiber filters and cassettes membrane;
The frame is made of wear-resistant 304 stainless steel, and the part in contact with the product is made of 316L stainless steel;
Polishing for the outer surface Ra ≤ 1.2 μm, polishing for the part in contact with the product Ra ≤ 0.4 μm;
The part in direct contact with the feed liquid is made of sanitary grade materials, such as 316L stainless steel, EPDM/PTFE/ TPE, etc. Certifications of the materials are available upon request;
System pipeline withstands pressure up to 6 bar;
Full set of accessories including hollow fiber bracket, allowing for use upon arrival directly.

FiltraLinX Benchtop Manual Hollow Fiber TFF System, TS-HMV-Q20
FiltraLinX Benchtop Manual Hollow Fiber TFF System, TS-HMV-Q40
FiltraLinX Benchtop Semi-Automatic TFF System, TS-CMV-S03
FiltraLinX Benchtop Semi-Automatic TFF System, TS-CMV-S20