Flame Photometer NFP-106, Testing Elements K, Li, Na, Ca and Ba, LABNICS EQUIPMENT LTD. (CAT#: STEM-AIAE-0089-LC)

Flame Photometer NFP-106 manufactured by LABNICS EQUIPMENT LTD. is used to determine concentration of metal ions like K, Li, Na, Ca and Ba in a test sample on the basis of their flame color and excitation wavelengths. It is supported with USB interface for data transfer and storage. It features a large color screen to display and represent analyzed data in graphical curve format.

Testing Elements: K, Li, Na, Ca and Ba
Display Value: Concentration value
No of Channels: 5
Data Range: 0.000~999.9
Range: K (0-100 ppm), Na(0-160 ppm), Li(0-100ppm), Ca(0-1000ppm) and Ba(0-3000ppm)
LOD (in ppm): K (0.01 ppm), Na(0.01 ppm), Li(0.1 ppm), Ca(2 ppm) and Ba(6 ppm)
Linear Error: K (0.195 ppm), Na (0.69 ppm), Li(0.15 ppm), Ca(3 ppm) and Ba (9 ppm)Response time: <8s
Sample uptake: <6ml/min
Stability: <3% drift over 15s during continuous aspiration
Reproducibility: <3% coefficient of variation for 7 consecutive samples
Fuel: LPG
Power consumption: 250 W
Power supply: AC 220V±22V 50Hz±1Hz
Working Temperature: 10°C -35°C
Relative Humidity: ≤ 85% RH
Overall Dimensions: 780×560×390 mm
Weight: 18 kg

7 inch Color touch screen display
Display of direct concentration of elements
It automatically determines correlation coefficient of test sample
It allows pre- selection of flame sizes
It is equipped with flame out protection devices
It is supported with air compressor that ensures essential stable flame conditions
It provides selection of different concentration units
It is featured with multilingual user interface