Fluke PM 6304/50n In New Smyrna Beach, FL, USA, Fluke lcr meters (CAT#: STEM-AIPO-0459-YJL)

Fluke PM 6304/50n In New Smyrna Beach, FL, USA, model PM 6304/50n is manufactured by Fluke lcr meters.
The PM 6304 has a basic accuracy of 0.1%, 3 test voltage levels and 204 test frequencies. The PM 6304C has an even higher basic accuracy, and can measure components or devices with an accuracy of 0.05%. Thanks to this high accuracy, the PM 6304C is idealy suited for calibrating the capacitance sourcing function of the high-performance Fluke 5500A Multi-Product Calibrator.

Condition: Used
Test freq. range high: 100kHz
Resistance range high: 200MOhm
Capacitance range high: 31.8 F
Measurements: Z, Rac, Rdc, C, L, Q, D, Phase

Select the test you need
Easy-to-use, at-a-glance display
Test frequencies from 50 Hz to 1 MHz (100 kHz for PM 6304)
0.1% basic accuracy (0.05% for PM 6304C)
RS-232 or IEEE-488 interface
AC test levels from 50 mV to 2V rms
Internal or external bias
DC test measurement (optional)
9 front panel setups
Actual component test voltage/current readback
Automatic zero trimming
Contact check and deviation mode (PM 6306 only)
Front-panel test posts for immediate 4-wire measurements
RCL Meter with Handler Interface

Fluke PM 6304/04n In New Smyrna Beach, FL, USA (CAT#: STEM-AIPO-0460-YJL)
Fluke PM 6304/06n In New Smyrna Beach, FL, USA (CAT#: STEM-AIPO-0461-YJL)
Fluke PM 6304/03n In New Smyrna Beach, FL, USA (CAT#: STEM-AIPO-0462-YJL)
Fluke PM 6304/02n In New Smyrna Beach, FL, USA (CAT#: STEM-AIPO-0463-YJL)
Fluke PM 6304/00n In New Smyrna Beach, FL, USA (CAT#: STEM-AIPO-0464-YJL)
Fluke PM 6306/56n In New Smyrna Beach, FL, USA (CAT#: STEM-AIPO-0473-YJL)