G1367B HiP-ALS Autosampler, Agilent Technologies (CAT#: STEM-CPO-0526-ZJF)

The manufacturer of the G1367B HiP-ALS Autosampler, Agilent Technologies is Agilent Technologies.

Condition: Refurbished, Certified Pre-owned
Glp features: Early maintenance feedback (EMF), electronic records of maintenance and errors
Communications: Controller-area network (CAN). RS232C, APG-remote standard, optional four external contact closures and BCD vial number output
Safety features: Leak detection and safe leak handling, low voltages in maintenance areas, error detection and display
Injection range: 0.1 – 100 µl in 0.1 µl increments Up to 1500 µl with multiple draw (hardware modification required)
Precision: Typically < 0.25% RSD from 5 – 100 µl, Typically < 1% RSD from 1 – 5 µl variable volume
Pressure range: 400 bar (5880 psi)
Sample viscosity range: 0.2 – 5 cp
Sample capacity: 2 × well plates (MTP) + 10 × 2 ml vials 108 x 2-mL vials in2 x 54 vial plate plus 10 additional 2 mL vials 30 x 6-mL vials in 2 x 15 vial plate plus 10 additional 2 mL vials54 Eppendorf tubes (0.5/1.5/2.0mL) in 2 x 27 Eppendorf tube plate. Also compatible with the Agilent 1200 Series sample capacity extension for further expansion of the sample capacity
Injection cycle time: Typically < 30 s using following standard conditions: Default draw speed: 200 µl/min Default eject speed: 200 µl/min Injection volume: 5 µl
Carry-over: Typically < 0.01% using the following conditions: Column: 125 x 4 mm Hypersil ODS, 5 µm Mobile phase: Water/Acetonitrile = 80/20 Flow rate: 1 ml/min Injection volume: 1 µl caffeine (1 mg/ml), 5 µl water to test carryover Outside wash of needle before injection: 20 sec with water using flush port

Refurbished to meet manufacturer's specification
In excellent condition
Thoroughly cleaned
Money back guarantee
Certified with warranty

G1367A Well-Plate Sampler, Agilent Technologies
G1367C HiP-ALS SL Autosampler, Agilent Technologies
G1376A Capillary Pump, Agilent Technologies