GE Patient Data Module PDM (Masimo Spo2) In Irvine, CA, USA, GE general medical equipment (CAT#: STEM-GLEPO-1136-YJL)

GE Patient Data Module PDM (Masimo Spo2) In Irvine, CA, USA, model Patient Data Module PDM (Masimo Spo2) is manufactured by GE general medical equipment.
GE Patient Data Module PDM (Masimo Spo2) /TESTED
The base hemodynamic parameter module, the Patient Data Module (PDM), is available in versions with Ohmeda, Nellcor, or Masimo SpO2 technology and with/without IBP. The PDM patient module saves ALL measured data, independently from where the information (data) comes from (measured directly by the PDM module or through interfaced external devices). The module is designed as an add-on module for future expansion with other parameter measurement modules.
Each PDM module can measure 3L/5L/6L/12L ECG, supports the 4L continuous arrhythmia analysis, can measure CO, Spo2, up to 4 IBP, 2 temperatures and uses the absolute best technology for noninvasive blood pressure measurements, the GE Dinamap algorithm. Performance depends on the software features installed in your Carescape monitor.

Condition: Used
Height: 2.75 in ( 7 cm)
Width: 5.75 in (14.6 cm)
Depth: 8.5 in (21.6 cm)
Weight: 1.1 kg (2.4 lb) without battery 1.3 kg (2.9 lb) with battery
Temperature: -40ºC to 60ºC (-40ºF to 140ºF)
Relative humidity: 15% to 95% (non-condensing)
Heat dissipation: 15.36 BTU/hour
Temperature: 10ºC to 35ºC (50ºF to 95ºF)
Relative humidity: 15% to 95% (non-condensing)

The Patient Data Module captures trend data throughout the transfer process, so providers have the right information at every touch point to ensure fast response to critical events.
To ensure monitoring continuity throughout transport, the Patient DataModule can power the Transport Pro®device in case of a low or missing battery.
The Patient Data Module can help you improve patient throughput and cost-efficiency by enabling you to flexibly move patients to the most appropriate care areas for their needs.

2002 GE 2111391 In Kaysville, UT, USA (CAT#: STEM-GLEPO-1137-YJL)
GE 46-286129P65 In Kaysville, UT, USA (CAT#: STEM-GLEPO-1138-YJL)
GE 46-286129P63 In Kaysville, UT, USA (CAT#: STEM-GLEPO-1139-YJL)
GE 2249999-2 In Kaysville, UT, USA (CAT#: STEM-GLEPO-1140-YJL)
GE 221-2994 In Kaysville, UT, USA (CAT#: STEM-GLEPO-1141-YJL)
GE AMX-4 Two Rear Drive Wheels In Kaysville, UT, USA (CAT#: STEM-GLEPO-1142-YJL)