Hepa Fan Filter Unit FFU-H2, 725x1475 mm, Sainsteel (CAT#: STEM-C-0845-ZJF)

Hepa Fan Filter Units manufactured by Sainsteel provide air filtration and is adaptable to any cleanroom configuration.
The units are made of food-grade material to ensure safe use in some industries.
The units combine strong configurations, low energy consumption, low noise and pressure drop, and three-speed control to meet a variety of applications.
The units can be customized to meet your unique requirements.

Type: FFU-H2
Model: Fan Filter Unit
Main Filter: HEPA Filter
Efficiency: 0.3μm-99.99%, 0.45M/S-12.5mmAq
Structure: Stainless Steel SUS 304
Dimension (mm): 725 (W) x 1,475 (L)
Power: Three-phase, 220/380Vac, 60Hz
Speed Level: Single Speed
Electric Current (A): 0.54/0.32
Power Consumption (VA): 237
Air Velocity (M/S): 0.34
Air Volume (CMM): 15
Noise dB(A): 52
Output Power (W): 90
Insulation: Grade (E)
Motor Efficiency (%): 64
Filter Size: 720 (W) x 1,470 (L)

Stainless steel 304 is of the highest grade.
HEPA Filter is 99.99% efficeint at 0.3μm.
It is adaptable to any cleanroom configuration.
FFU dimensions can be customized.
Strong configurations can support the weight of a person during installation and replacement.
Noise and pressure drop can be minimized by using a special inlet design.
An efficient motor and a high-quality blower result in lower energy consumption.
Three levels of speed adjustment are available on the single-phase motor.
Depending on the situation, the air velocity and volume can be adjusted.

Hepa Fan Filter Unit FFU-H1, 575x1175 mm, Sainsteel
Hepa Fan Filter Unit FFU-H3, 1175x1175 mm, Sainsteel
Ulpa Fan Filter Unit FFU-U1, 575x1175 mm, Sainsteel
Ulpa Fan Filter Unit FFU-U2, 725x1475 mm, Sainsteel
Ulpa Fan Filter Unit FFU-U3, 1175x1175 mm, Sainsteel