HEPA Filtered PCR Workstation,2 ft., Plas-Labs (CAT#: STEM-LE-0920-LC)

The new HEPA Filtered PCR Workstation has all the same basic functions as our standard PCR UV Chamber, but also includes the factory installed HEPA filter system. The efficiency of the HEPA filter system at 0.3 microns is 99.9977%. No tools are required to replace the HEPA filter. This is a positive pressure laboratory. The noise level of the fan is rated to be less than 40 dBA.

Exterior Dimensions:WxDxH 24 x 18 x 28 in.
Interior Dimensions:WxDxH 23.5 x 17 x 21 in.
Size(s):2 ft.
UV Lamp:254 nm UV Lamp

"Bright" lighting system (guaranteed 40,000 hours of light bulbs).
"Mini HEPA" filter size 4 inches x 9.5 inches x 1 inch thick (101 mm x 240 mm x 25.4 mm thick)
The HEPA filter can be replaced without any tools.
The fan noise level is rated to be less than 40 dBA.
Form a liquid barrier at a suitable location to facilitate removal of spillage.
Standard twenty-four month warranty (non-consumable filter).

Germicidal Workstation (Still Air Enclosure), PCR UV Chamber PCR Workstation