HTZ Series Vacuum Drying Oven-Vacuum Digital Display and Control, RT+10~250℃, 430L, Shanghai Huitai Equipment Manufacturing Co., Ltd (CAT#: STEM-GLE-1049-YJL)

HTZ Series Vacuum Drying Oven-Vacuum Digital Display and Control, RT+10~250℃, 430L, model HTZ-6500L, is manufactured by Shanghai Huitai Equipment Manufacturing Co., Ltd.
The vacuum environment greatly reduces the boiling point of the liquid that needs to be expelled, so vacuum drying can be easily applied to heat-sensitive substances;
For samples that are not easy to dry, such as powder or granular samples, vacuum drying can effectively shorten the drying time;
Various mechanical parts or other porous samples with complex structures are cleaned and dried by vacuum drying, and no participating substances are left after they are completely dried;
Safer to use - under vacuum or inert conditions, the possibility of thermal explosion of oxides is completely eliminated;
In contrast to ordinary drying which relies on air circulation, powdered samples are not blown or moved by the flowing air.

Power supply: AC220V 50HZ/16A
Temperature control range: RT+10~250℃
Constant temperature fluctuation: ±1℃
Temperature resolution: 0.1℃
Vacuum degree: 99.99kPa~0.13kPa
Input power: 3500W
Liner sizeW×D×H (mm): 630×810×845
Dimensions W×D×H (mm): 790×1030×1855
Volume: 430L
Load carrier (standard): Internal heating, 4 partitions cannot be extracted
Liner material: stainless steel
Timing range: 1~9999min

Vacuum degree control: The digital vacuum gauge automatically controls the vacuum degree, providing you with more accurate and effective vacuum degree control. The degree of vacuum can be easily controlled through the panel, and the degree of vacuum can be easily controlled within the range of 1.0×10 to 1.0×105 (Pa)-1 between any two waypoints or areas, with a control accuracy of ±1%. The vacuum gauge uses a resistance silicon tube pressure sensor to ensure a stable pressure value and provide you with more accurate and effective vacuum control
The heating element is located on the inner partition of the box. Compared with the traditional vacuum drying box, the heating time is shortened by 50%.
The aluminum shelf is stamped by a special process, which is not oxidized at high temperature and has fast heat conduction. Minimize heat loss
The cuboid studio maximizes the effective volume, and the microcomputer temperature controller ensures accurate and reliable temperature control.
Tempered, bulletproof double-glazed doors allow viewing of objects in the studio at a glance, and can be filled with inert gas.
The closing tightness of the box door can be completely adjusted by the user, and the integrally formed silicone rubber door seal ensures a high degree of vacuum in the box.
The studio is made of stainless steel plate, and the box shell is made of high-quality cold-rolled steel plate, and the surface is electrostatically sprayed.
Storage, heating, testing and drying are carried out in an environment without oxygen or full of inert gas, which will not cause oxidation.

Vacuum Drying Oven BPZ-LC Series (CAT: STEM-GLE-0210-YJL)
Vacuum Drying Oven-Microprocessor Controller (With Timing)(CAT: STEM-GLE-0222-YJL)
Vacuum Drying Oven-Electronic Semiconductor (CAT: STEM-GLE-0229-YJL)
Multi Box Vacuum Drying Oven BPZ (CAT: STEM-GLE-0240-YJL)
DZF-6000 Series Vacuum Drying Oven (CAT: STEM-GLE-1040-YJL)
HTZ Series Vacuum Drying Oven-Vacuum Digital Display and Control (CAT: STEM-GLE-1045-YJL)