Huamo HM-EDI-2 Electrodeionization - EDI Modules for Water Polishing, 1.4-2.5m³/h, Huamo (CAT#: STEM-GMAE-4882-LGZ)

Electrodeionization (EDI) is an electrically driven water treatment technology that uses electricity, ion exchange membranes, and resins to remove ionized species from water.
It cleverly combines electrodialysis with ion exchange technology, uses high-voltage electrodes at both ends to drive the movement of charged ions in water, and cooperates with ion exchange resin and selective resin membrane to accelerate ion movement, so as to achieve the purpose of water purification.

Requested Of Feed Water
Resource water: RO water conductivity less than 20 us.cm better than 10 us.cm
PH: 6.0-9.0
Temperature: 5-35’c
Hardness: Less than 0.5ppm
Organics: Max 0.5ppm, Recommend 0 ppm
Oxidizers: Max 0.05ppm
FE MN: Max 0.01ppm
Silica: Max 0.5ppm
Carbon Dioxide: max 5ppm
Oil: Not Detectable

Product Flow (m³/h): 1.4-2.5
Recovery(%): 90-95
Resistivity(MΩ•Cm): ≥15
Voltage(DCV): 30-150
Voltage(DCA): 2-5
Inlet Pressure(Mpa): 0.15-0.4
Max Pressure(Mpa): 0.7
Fresh Water / Water Pipe Nozzle Size: DN25
Fresh Water Inlet / Outlet Nozzle Size: DN15

Morui MR-NF-2540 Industrial Nanofiltration Membrane, 28(2.6)ft²(m²), Morui (CAT#-STEM-GMAE-4888-LGZ)
Huamo HM-EDI-3 Electrodeionization - EDI Modules for Water Polishing, 2.4-3.8m³/h, Huamo (CAT#-STEM-GMAE-4883-LGZ)
Huamo HM-EDI-5 Electrodeionization - EDI Modules for Water Polishing, 4.5-5.5m³/h, Huamo (CAT#-STEM-GMAE-4884-LGZ)
Morui MR-UF-8060 Spiral Wound UF Membranes, 25m², Morui (CAT#-STEM-GMAE-4885-LGZ)
Morui MR-UF-4046 Spiral Wound UF Membranes, 4.5m², Morui (CAT#-STEM-GMAE-4886-LGZ)
Morui MR-UF-8060A Spiral Wound UF Membranes, 25m², Morui (CAT#-STEM-GMAE-4887-LGZ)