Unlock Exclusive Discounts & Flash Sales! Click Here to Join the Deals on Every Wednesday!

Instek GPT-9803 Hipot Tester In Roseville, CA, USA, GW Instek electrical safety testers (CAT#: STEM-AIPO-0613-YJL)

Highlights

3-in-1 Model Capable of Performing AC Withstanding, DC Withstanding, and Insulation Resistance Tests
200VA AC Test Capacity
240 x 64 Ice Blue Dot Matrix LCD

Cat Number: STEM-AIPO-0613-YJL

Application: For performing AC and DC withstanding test

Model: GPT-9803

Add to Cart



Description

Instek GPT-9803 Hipot Tester In Roseville, CA, USA, model GPT-9803 is manufactured by GW Instek electrical safety testers.
The GPT-9803 from GW Instek is a GPT-9800 series A.C. 200VA AC/DC voltage/insulation resistance tester. It is capable of performing both AC and DC withstanding tests. The GPT-9803 is built upon a high efficiency PWM amplifier platform with AC 200VA maximum output capacity to impede influence from voltage fluctuation of input AC source. A self check is performed to make sure all the functions and operations are under normal condition each time when the tester is turned on, the zero crossing turn-on design imposes output voltage to always begin at zero crossing of a sine wave to avoid impact of surge voltage output and output voltage is automatically cut off (within 150µs) when abnormal output voltages have been detected or when the upper or lower current limits have been reached during testing. The tester is equipped with a simple & clear panel layout, high resolution dot matrix LCD display and colour LED indicators, allow operators to interpret measurement results easily and quickly.

Specification

Condition: New
Test Type Hipot: AC, DC, IR
Max AC Test Voltage: 5 kV
Max DC Test Voltage: 6 kV

Features

3-in-1 Model Capable of Performing AC Withstanding, DC Withstanding, and Insulation Resistance Tests
200VA AC Test Capacity
240 x 64 Ice Blue Dot Matrix LCD
Manual/Auto Mode
Function Key for quick selecting
High intensity flash for Caution and Status indication
Safety INTERLOCK function
Zero Crossing Turn-On Operation
Controllable Ramp-up Time
High resolution: 1 uA for measuring current, 2V for setting voltage
PWM amplifier to enhance the power efficiency and reliable testing
Max 100 memory block for test condition (step) setting - Each step can be named individually
Remote terminal on the front panel for start and stop control
Interface: RS-232C, USB device, Signal I/O, and GPIB (optional)

Related Products

Instek GPT-9902A Hipot Tester In Roseville, CA, USA (CAT#: STEM-AIPO-0614-YJL)
Instek GPT-9903A Hipot Tester In Roseville, CA, USA (CAT#: STEM-AIPO-0615-YJL)
Instek GPT-9904 Hipot Tester In Roseville, CA, USA (CAT#: STEM-AIPO-0616-YJL)
Instek LCR-6200 LCR Meter In Roseville, CA, USA (CAT#: STEM-AIPO-0618-YJL)
Instek LCR-6002 LCR Meter In Roseville, CA, USA (CAT#: STEM-AIPO-0619-YJL)
Instek LCR-6100 LCR Meter In Roseville, CA, USA (CAT#: STEM-AIPO-0620-YJL)

Other recommended products

Advertisement