Insulated Incubator, Overall Dimensions 700×630×965 mm, Internal Size 550×500×650 mm, 1030 W, Shanghai Boxun Medical Biological Instrument Corp. (CAT#: STEM-GLE-0386-LGH)

Insulated Incubator, BG-160, Shanghai Boxun Medical Biological Instrument Corp.
1. The shell is made of cold rolled steel plate, the surface is electrostatic sprayed, the inner tank mirror is stainless steel, the baffle can be adjusted arbitrarily;
2. Temperature control system using microcomputer microcomputer technology, LCD screen display various parameters, temperature controller with temperature control, timing, overtemperature alarm and other functions;
3. A silicone rubber sealing ring is installed between the studio and the tempered glass inner door to ensure the sealing of the inner door and the studio;
4. The left, right and bottom of the wall outside the studio are heated by a water jacket. The studio is equipped with a small fan with low noise to promote air circulation and breeze to ensure temperature uniformity in the box.
5. The wind speed can be automatically adjusted according to the working state;
6. Programmable program design, can set 10 segments 100 cycles;
7. With RS-485 interface, can be connected to the computer or recorder, real-time monitoring of the working state;
8. It has the function of parameter memory and call recovery to protect data loss caused by power failure and crash.

Power supply voltage: AC 220V±10%/50Hz±2%
Heating mode: water jacket type
Temperature control range: room temperature +2℃-65℃
Temperature resolution: 0.1℃
Temperature fluctuation: ±0.2℃
Temperature uniformity: ±0.5℃
Input power: 1030W
Liner size (mm) : 550×500×650
Dimensions (mm) : 700 x 630 x 965
Load carrier: 3

Temperature control system using microcomputer microcomputer technology, LCD screen display various parameters, temperature controller with temperature control, timing, overtemperature alarm and other functions;
A silicone rubber sealing ring is installed between the studio and the tempered glass inner door to ensure the sealing of the inner door and the studio;
The left, right and bottom of the wall outside the studio are heated by a water jacket. The studio is equipped with a small fan with low noise to promote air circulation and breeze to ensure temperature uniformity in the box.