Large-capacity High-speed Refrigerated Centrifuge, 26000r/min, Dimensions 730×930×960mm (CAT#: STEM-LC-0079-LGH)

The motor is directly driven, eliminating the trouble of changing the belt.
Intelligent vacuum friction reduction system, simple and effective sealing structure, no need to apply vacuum silicone grease at the seal, and no special maintenance is required for each sealing part.
A new generation of dynamic intelligent control system, the user can use the centrifuge according to the conventional centrifuge usage method without additional operation.
Excellent energy consumption performance, compared with traditional centrifuges, its energy consumption is only 35% of similar products.
Using AC variable frequency motor, the speed accuracy is controlled within ±10r/min, the original motor bearing heat dissipation patent, so that the motor bearing always works in the best state, greatly improving the life of the motor, the national patent ZL201922481254.0.
The flexible drive device of the centrifuge with protection can not only make the rotor run extremely smoothly, but also can continuously detect the unbalanced state of the rotor during the entire operation cycle, and the centrifugation process is safe and worry-free.
The centrifuge door lock with labor-saving operation and good safety has obtained the national patent ZL201420116441.3.
The 316 stainless steel inner sleeve and the unique copper tube arrangement technology not only make the refrigeration efficiency extremely high, the heat preservation is good, but also the overall corrosion resistance is excellent.
The self-developed high-speed centrifuge bottle can not only withstand greater centrifugal force, but also can be sterilized at high temperature without deformation (121℃, 15min), national patent ZL201720768611.X.
The ergonomic design, the height of the whole machine is moderate, it is convenient to install and unload the rotor.
Simple rotor installation and positioning, just put the rotor on the drive shaft to complete the installation and positioning without tools.
High-strength rotors, corrosion-resistant, all aluminum alloy rotors are forged with 7075 series alloy aluminum, which has high strength, long life and high safety. The surface is hard anodized and has strong corrosion resistance.
Equipped with a new generation of carbon fiber rotors, it has stronger safety performance and better corrosion resistance. Its weight is only two-thirds of the aluminum alloy rotor, so even girls can easily lift it.
Rotors are automatically identified to avoid the risk of incorrect settings, and the cumulative number of runs and time for each rotor can be recorded.
Taking into account high speed and large capacity, it can not only be used as laboratory sample separation, but also as biopharmaceutical equipment.
7-inch high-sensitivity (direct operation with gloves), high-definition (800*480) touch screen control, easy operation and intuitive display.
The setting parameters and running parameters are displayed on the same screen, which is intuitive and easy to understand.
Directly input the value of the setting parameter, which can quickly set the parameter and is convenient (the same type of button-type product needs to adjust the button back and forth when setting the parameter).
Centrifugal force and rotational speed can be switched automatically through the button, and the rotational speed or centrifugal force can be quickly set (the corresponding rotational speed or centrifugal force is calculated internally).
The powerful control system can realize the functions of step centrifugation, scheduled start, sample ID, curve mode, program mode, and multi-language selection.
Excellent security performance, optional user management, to prevent the program from being tampered with or deleted due to unexpected situations.
Safe and stable centrifugal performance, the maximum speed is 26000r/min, and a variety of rotors are optional, which can easily help you to achieve rapid sample separation.

Maximum speed: angle rotor 26000r/min, horizontal rotor 4000r/min
Maximum relative centrifugal force: angle rotor 80035xg, horizontal rotor 3500xg
Maximum capacity: angle rotor 6×1000ml, horizontal rotor 4×750m
Timing range: 1min~99h59min, HOLD
Timing mode: start timing, to tachometer, instantaneous continuous timing mode, timing start mode
Temperature setting range: -20℃~40℃
Temperature control accuracy: ±1℃
Speed ​​accuracy: ±10r/min
Speed ​​range: 100RPM ~ maximum speed, step 100 (can be customized according to demand, multiples of 10)
Rotor identification: yes
Step Centrifugation: Yes (100 programs, each program is divided into 5 steps, more programs can be set by adding external memory)
Pre-cooling: yes (can reach -20℃)
Compressor unit: Imported high-performance compressor unit environmentally friendly refrigerant (R404a)
Fault protection requirements: rotor identification, unbalance protection, door lock protection, door cover anti-pressure protection, motor overheat protection, overspeed protection, overtemperature protection
Motor: AC variable frequency motor
Support power supply: AC 220±22V 50Hz
Total Power: 1.7kW
Machine noise: ≤65dB (A)
Dimensions (length × width × height): 730 × 930 × 960 (mm)
Package size (length × width × height): 880 × 1120 × 1180 (mm)
Net weight: 260kg

The motor is directly driven, eliminating the trouble of changing the belt.
Intelligent vacuum friction reduction system, simple and effective sealing structure, no need to apply vacuum silicone grease at the seal, and no special maintenance is required for each sealing part.
A new generation of dynamic intelligent control system, the user can use the centrifuge according to the conventional centrifuge usage method without additional operation.
Excellent energy consumption performance, compared with traditional centrifuges, its energy consumption is only 35% of similar products.
Using AC variable frequency motor, the speed accuracy is controlled within ±10r/min, the original motor bearing heat dissipation patent, so that the motor bearing always works in the best state, greatly improving the life of the motor, the national patent ZL201922481254.0.
The flexible drive device of the centrifuge with protection can not only make the rotor run extremely smoothly, but also can continuously detect the unbalanced state of the rotor during the entire operation cycle, and the centrifugation process is safe and worry-free.
The centrifuge door lock with labor-saving operation and good safety has obtained the national patent ZL201420116441.3.
The 316 stainless steel inner sleeve and the unique copper tube arrangement technology not only make the refrigeration efficiency extremely high, the heat preservation is good, but also the overall corrosion resistance is excellent.
The self-developed high-speed centrifuge bottle can not only withstand greater centrifugal force, but also can be sterilized at high temperature without deformation (121℃, 15min), national patent ZL201720768611.X.
The ergonomic design, the height of the whole machine is moderate, it is convenient to install and unload the rotor.
Simple rotor installation and positioning, just put the rotor on the drive shaft to complete the installation and positioning without tools.
High-strength rotors, corrosion-resistant, all aluminum alloy rotors are forged with 7075 series alloy aluminum, which has high strength, long life and high safety. The surface is hard anodized and has strong corrosion resistance.
Equipped with a new generation of carbon fiber rotors, it has stronger safety performance and better corrosion resistance. Its weight is only two-thirds of the aluminum alloy rotor, so even girls can easily lift it.
Rotors are automatically identified to avoid the risk of incorrect settings, and the cumulative number of runs and time for each rotor can be recorded.
Taking into account high speed and large capacity, it can not only be used as laboratory sample separation, but also as biopharmaceutical equipment.
7-inch high-sensitivity (direct operation with gloves), high-definition (800*480) touch screen control, easy operation and intuitive display.
The setting parameters and running parameters are displayed on the same screen, which is intuitive and easy to understand.
Directly input the value of the setting parameter, which can quickly set the parameter and is convenient (the same type of button-type product needs to adjust the button back and forth when setting the parameter).
Centrifugal force and rotational speed can be switched automatically through the button, and the rotational speed or centrifugal force can be quickly set (the corresponding rotational speed or centrifugal force is calculated internally).
The powerful control system can realize the functions of step centrifugation, scheduled start, sample ID, curve mode, program mode, and multi-language selection.
Excellent security performance, optional user management, to prevent the program from being tampered with or deleted due to unexpected situations.
Safe and stable centrifugal performance, the maximum speed is 26000r/min, and a variety of rotors are optional, which can easily help you to achieve rapid sample separation.