Large Capacity Low Speed Refrigerated Centrifuge, 6000r/min, Dimensions 728×935×943mm (CAT#: STEM-LC-0095-LGH)

The door cover can be automatically closed and opened with a simple key operation, without the need to manually open and close the door; it has an intelligent anti-pinch device for the door cover.
6x1000ml can efficiently centrifuge biological products, and can also separate 6 400ml triple bags at a time, which greatly improves the production efficiency and separation effect.
With unbalance protection, automatic rotor identification, overspeed protection, overtemperature protection, motor overheating protection, door cover protection and other protection functions.
The aluminum alloy rotor is made of 7075-T6 aviation-grade forged aluminum alloy, which is hard-oxidized and corrosion-resistant. Every process from raw material procurement, processing to finished products is strictly controlled; material certification, flaw detection test report, tensile test report, chemical composition test Reports, processing inspection reports have original records. The centrifugal chamber is made of 316L stainless steel, 2mm thick (material proof can be provided).
Rack (3mm Q235 steel), protective cover (15mm Q235 steel), door cover middle partition (3mm Q235 steel).
The system adopts a unified and standard Ethernet communication interface, and provides a point table of key parameters, which is convenient for system expansion and incorporating data into system monitoring.
Quickly call up to 100 programs, each program can be easily named, reduce the time between different centrifugation runs, and quickly start conventional centrifugation; 5-stage centrifugation with different speeds, times, and temperatures can be realized with one key.
11 kinds of acceleration curves, 12 kinds of deceleration curves, and 10 gears are custom gears to prevent secondary suspension of the sample and achieve the best centrifugal effect.
In the manual mode, the centrifuge parameters can be quickly set, and the centrifugal force and speed can be switched with one key.
Through the system settings, the operation data records, fault information records, etc. can be managed.
1 to 100 centrifuges can be monitored through the smart terminal (computer); the mobile APP can be used to provide real-time connection with the centrifuge; each interface has built-in help information; the centrifuge can be made intelligent (additional configuration is required).

Maximum speed: angle rotor 6000r/min, horizontal rotor 4200r/min
Maximum relative centrifugal force: angle rotor 6680xg, horizontal rotor 5100xg
Maximum capacity: angle rotor 6×500ml, horizontal rotor 6×1000ml
Speed accuracy: ±10r/min
Timing range: 1min~99h59min, 1s~99min59s two timing units switching; the default is 1s~99min59s
Timing mode: start timing, to tachometer, continuous timing mode, scheduled timing start mode
Temperature setting range: -20℃~40℃, step 1℃
Temperature control accuracy: ±2℃
Pre-cooling: yes
Rotor identification: yes
Unbalance Protection: Yes
Computer control: RS485 or RS232
Fault protection requirements: rotor identification, unbalance protection, door lock protection, door cover anti-pressure protection, motor overheat protection, overspeed overtemperature protection
Overall noise: ≤ 65dB(A)
Power supply: AC220V±22V 50Hz
Total Power: 4kW
Dimensions: 728×935×943mm(L×W×H)
Outer packing size: 920×1040×1200mm(L×W×H)
Weight: 330kg

The door cover can be automatically closed and opened with a simple key operation, without the need to manually open and close the door; it has an intelligent anti-pinch device for the door cover.
6x1000ml can efficiently centrifuge biological products, and can also separate 6 400ml triple bags at a time, which greatly improves the production efficiency and separation effect.
With unbalance protection, automatic rotor identification, overspeed protection, overtemperature protection, motor overheating protection, door cover protection and other protection functions.
The aluminum alloy rotor is made of 7075-T6 aviation-grade forged aluminum alloy, which is hard-oxidized and corrosion-resistant. Every process from raw material procurement, processing to finished products is strictly controlled; material certification, flaw detection test report, tensile test report, chemical composition test Reports, processing inspection reports have original records. The centrifugal chamber is made of 316L stainless steel, 2mm thick (material proof can be provided).
Rack (3mm Q235 steel), protective cover (15mm Q235 steel), door cover middle partition (3mm Q235 steel).
The system adopts a unified and standard Ethernet communication interface, and provides a point table of key parameters, which is convenient for system expansion and incorporating data into system monitoring.
Quickly call up to 100 programs, each program can be easily named, reduce the time between different centrifugation runs, and quickly start conventional centrifugation; 5-stage centrifugation with different speeds, times, and temperatures can be realized with one key.
11 kinds of acceleration curves, 12 kinds of deceleration curves, and 10 gears are custom gears to prevent secondary suspension of the sample and achieve the best centrifugal effect.
In the manual mode, the centrifuge parameters can be quickly set, and the centrifugal force and speed can be switched with one key.
Through the system settings, the operation data records, fault information records, etc. can be managed.
1 to 100 centrifuges can be monitored through the smart terminal (computer); the mobile APP can be used to provide real-time connection with the centrifuge; each interface has built-in help information; the centrifuge can be made intelligent (additional configuration is required).