low Speed Centrifuge, 5350r/min, Dimensions 560×660×850mm，535-1 (CAT#: STEM-LC-0094-LGH)

Imported environmentally friendly compressor units are used, with good cooling effect and no environmental pollution.
Microcomputer control, AC variable frequency motor drive, large torque, no toner pollution, maintenance-free.
Automatic calculation and setting of centrifugal force RCF value.
Equipped with a variety of pipe racks, hangers and adapters, one machine can be used for multiple purposes.
Programmable operation, multiple routine programs can be stored.
There are various protection measures such as overspeed, overtemperature, door cover protection, etc. to ensure personal and machine safety.
The electronic door lock is automatically pulled and closed. It can be automatically closed by gently closing the door cover. The door cover cannot be opened during operation. If the door cover is not closed, the centrifuge cannot start and the door lock failure is reported.
9 kinds of acceleration curves, 10 kinds of deceleration curves, two-stage damping and shock absorption, to prevent the secondary suspension of the sample, to achieve the best centrifugal effect.
High-strength rotors, corrosion-resistant, all aluminum alloy rotors are made of 7075-T6 series alloy aluminum, which has high strength, long life and high safety. The surface is hard anodized, with thick oxide layer and strong corrosion resistance.

Maximum speed: 5350r/min
Maximum relative centrifugal force: 5030×g
Maximum capacity: 4×750ml
Speed accuracy: ±10r/min
Timing range: 1s~99min59s/1min~99h59min
Overall noise: ≤65dB(A)
Power supply: AC220V±22V 50Hz
Machine power: 1.1kW
Dimensions: 560×660×850(mm)
Outer packing size: 756×856×1320(mm)
Weight: 98kg

Imported environmentally friendly compressor units are used, with good cooling effect and no environmental pollution.
Microcomputer control, AC variable frequency motor drive, large torque, no toner pollution, maintenance-free.
Automatic calculation and setting of centrifugal force RCF value.
Equipped with a variety of pipe racks, hangers and adapters, one machine can be used for multiple purposes.
Programmable operation, multiple routine programs can be stored.
There are various protection measures such as overspeed, overtemperature, door cover protection, etc. to ensure personal and machine safety.
The electronic door lock is automatically pulled and closed. It can be automatically closed by gently closing the door cover. The door cover cannot be opened during operation. If the door cover is not closed, the centrifuge cannot start and the door lock failure is reported.
9 kinds of acceleration curves, 10 kinds of deceleration curves, two-stage damping and shock absorption, to prevent the secondary suspension of the sample, to achieve the best centrifugal effect.
High-strength rotors, corrosion-resistant, all aluminum alloy rotors are made of 7075-T6 series alloy aluminum, which has high strength, long life and high safety. The surface is hard anodized, with thick oxide layer and strong corrosion resistance.