Low Temperature Incubator (Low temperature freezer), -40~65℃, 500L, Shanghai Huitai Equipment Manufacturing Co., Ltd (CAT#: STEM-CC-0104-YJL)

Low Temperature Incubator (Low temperature freezer), -40~65℃, 500L, model LRH-500CB, is manufactured by Shanghai Huitai Equipment Manufacturing Co., Ltd. The large screen of the product adopts liquid crystal display, multiple sets of data are displayed on one screen, and the menu-type operation interface is simple and easy to understand and easy to operate.

Temperature control range: -40~65℃
Temperature resolution: 0.1℃
Temperature fluctuation: High temperature±0.5℃ Low temperature±1℃
Power supply: Three-phase five-core AC380V 50Hz
Working temperature: +5~30℃
Input power: 4550W
Liner sizeW×D×H (mm): 700×700×1020
Dimensions W×D×H (mm): 825×995×1780
Volume: 500L
Load carrier: 3pcs
Timing range: 1~9999min

Humanized design
⊕ Committed to the world's environmental protection and health initiatives, using 134 a fluorine-free refrigerants, high efficiency, energy saving, and making the environment healthier!
⊕It adopts mirror surface stainless steel liner, and the four-corner semi-arc design is easy to clean, and the distance between the shelves in the box is adjustable.
⊕ It adopts double-layer door structure, which has good thermal insulation performance, and does not affect the temperature in the box when observing the situation in the box.
⊕There is a test hole with a diameter of 25mm/50mm on the left side of the box, which is convenient for experimental operation and temperature measurement. (optional)

Quality Assurance
⊕Adopt international brand compressors and self-developed compressor cooling system, which can effectively prolong the service life of compressors.
⊕Adopt JAKEL pipe flow circulation fan and uniquely designed air duct structure to create a good air circulation system and effectively ensure the temperature uniformity in the box.
⊕Using internationally renowned brand humidity sensor, self-designed built-in water tank electric heating tube humidification system, effectively guaranteeing humidity deviation.
⊕PID control mode, precise temperature and humidity control with small fluctuations, menu-type operation page, simple and easy to understand and easy to operate.
⊕ It has 99 cycle programs, each cycle is divided into 30 sections, and each section has 99 hours and 99 minutes of cycle steps, which can meet almost all complex experimental procedures.
◆Independent temperature limit alarm system (optional)
⊕ When the temperature exceeds the limit, the operation will be automatically interrupted, and an audible and visual alarm will prompt the operator. To ensure the safe operation of the experiment without accidents.
◆Convenient data processing (optional)
⊕ With USB or RS485 interface, it can be connected to a printer or computer, and can record the changes of temperature parameters. (optional)

BPH Precision Constant Temperature Incubator （CAT#：STEM-CC-0089-YJL）
Precision Constant Temperature Incubator （CAT#：STEM-CC-0092-YJL）
Low Temperature Incubator （CAT#：STEM-CC-0093-YJL）
DHP Electro-thermal Constant-temperature Incubator （CAT#：STEM-CC-0105-YJL）
GHP Water-Jacket Thermostatic Constant Incubator （CAT#：STEM-CC-0109-YJL）
HH.CP Incubator-CO2 （CAT#：STEM-CC-0113-YJL）