MAC 10® LEAC Fan Filter Unit, 2'×4', 277 V, 850 ft³/min, Envirco (CAT#: STEM-C-0400-ZJF)

MAC 10® LEAC Fan Filter Unit manufactured by Envirco provides clean air for critical environments, with extra low noise, low consumption, low profile and high airflow.
The MAC 10® LEAC Fan Filter Unit is the first to combine extra low noise, low consumption, low profile and high airflow.
The MAC 10® LEAC offers one of the lowest power consumption in the industry. The unit operates at only 185 watts @ 90 fpm, which reduces operating costs by consuming less than conventional FFUs.
The MAC 10® LEAC has a low profile of less than 13" (330 mm) for standard model.
The MAC 10® LEAC standard filter is integrated with the unit housing, RSR filters are optional.

Brands: Envirco®
Voltage: 277 V
Frequency: 60 Hz
Phase: 1
Full Load Current: 1.17 A
Filter Housing Material:
Mill Finished Aluminum
Industry Standards / Certifications: cUL listed (115 V, 208-240 V, 277 V) with standard UL 900 filter, File number E152685 (UL507)
Filter Type: High Efficiency Particulate Air (HEPA): 99.99% at 0.3µm
Orientation: Horizontal

Performance
Nominal Unit Size: 2'×4'
Active Filter Face Area: 5.3 ft²
Maximum Air Flowrate: 850 ft³/min
Energy Consumption Rate at Maximum Air Flowrate: 235 W
Air Flowrate at 90 Feet per Minute (ft/min) Average Speed: 470 ft³/min
Energy Consumption Rate at 90 Feet per Minute (ft/min) Average Speed: 175 W
Sound Level at 90 Feet per Minute (ft/min) Average Speed: 51 dBA
Unit Weight: 76 lb
Note
All airflow is tested in accordance with the (ANSI/AMCA 210-07), (ANSI/ASHRAE 51-07) test standards for Certified Aerodynamic Performance Rating.
90 fpm values base on active filter face area
Heat Gain: BTU = Watts × 3.413.

Dimensions
Dimension A: 23.63 in (600mm)
Dimension B: 47.63 in (1210mm)
Dimension C: 14.67 in (373mm)

Options
Ultra-low Penetration Air (ULPA) Filter: 99.9995 % efficient at 0.12 µm (U15)
PTFE boron-free ULPA filter
Airflow Indicator Light for external monitoring of motor operation. Green indicator indicates normal operation.
Duct Collar 10" (254 mm) , 12" (305 mm) and 14" (355.6 mm) for direct connection to the air conditioning supply
Fluorescent Light: Provides illumination with minimal airflow disruption
Ion Bar: Neutralizes static charges below the filter. (Universal voltage power supply required)
Finish: Powder coat painted or Stainless Steel
MERV 8 G4 pre-filter available
room side Replaceable (RSR) filter (2'×4')
RSRE: Room side replaceable filter and motor/blower assembly (2'×4')

Low consumption, low profile and low operating costs
3 speed control for low, medium, and high adjustment
Backward-inclined centrifugal fan. (Not available with SSSC)
Snap-in 20"×20" pre-filter can be easily removed for replacement or maintenance.
Walkable Plenum rated 250 lbs without prefilter
In accordance with IEST recommended RPC standards

MAC 10® LEAC Fan Filter Unit, 2'×4', 115 V, 900 ft³/min, Envirco
MAC 10® LEAC Fan Filter Unit, 2'×4', 220 V, 900 ft³/min, Envirco
MAC 10® LEAC Fan Filter Unit, 2'×4', 277 V, 900 ft³/min, Envirco
MAC 10® LEAC Fan Filter Unit, 2'×4', 115 V, 850 ft³/min, Envirco
MAC 10® LEAC Fan Filter Unit, 2'×4', 220 V, 850 ft³/min, Envirco