MAC 10® LEDC Fan Filter Unit, 2'×4', 277 V, 850 ft³/min, Envirco (CAT#: STEM-C-0436-ZJF)

MAC 10® LEDC Fan Filter Unit manufactured by Envirco is a green product solution providing clean air for critical environments, with the most control options and the most versatile control system.
The MAC 10® LEDC can help to earn LEED (Leadership in Energy and Environmental Design) points with its many energy-saving features.
The MAC 10® LEDC leads the industry in energy efficiency by utilizing a unique combination of EC motor technology with ENVIRCO®'s proprietary baffling system and backward inclined fan.
The EC motor with internal microprocessor provides high performance and long service life with energy consumption rates as low as 90 W at 90 fpm.
The unit provides low noise as low as 52.3 dBA.

Brands: Envirco®
Optional Duct Inlet Connection Size:
10 in (254mm)
12 in (305mm)
14 in (356 mm)
Voltage: 277 V
Frequency: 60 Hz
Phase: 1
Full Load Current: 1.35 A
Industry Standards / Certifications: cUL listed (115 V, 208-240 V, 277 V) with standard UL 900 filter, File number E152685 (UL507)
Filter Type: High Efficiency Particulate Air (HEPA): 99.99% at 0.3µm
Minimum Efficiency Reporting Value (MERV) Rating: MERV 8
Filter Housing Material: Mill Finished Aluminum
External Static Operating Pressure: 1.0 inWg 200 Pa
Orientation: Horizontal

Performance
Nominal Unit Size: 2'×4'
Active Filter Face Area: 5.3 ft²
Maximum Air Flowrate: 850 ft³/min
Energy Consumption Rate at Maximum Air Flowrate: 240 W
Air Flowrate at 90 Feet per Minute (ft/min) Average Speed: 477 ft³/min
Energy Consumption Rate at 90 Feet per Minute (ft/min) Average Speed: 65 W
Sound Level at 90 Feet per Minute (ft/min) Average Speed: 47 dBA
Unit Weight: 71 lb
Note
Performance tested in accordance with the (ANSI/AMCA 210-07), (ANSI/ASHRAE 51-07) test standards for Certified Aerodynamic Performance Rating.
90 fpm values based on active filter face area. BTU = Watts × 3.413.

Dimensions
Dimension A: 23.63 in (600mm)
Dimension B: 47.63 in (1210mm)
Dimension C: 16.43 in (417mm)

Options
Room-side Replaceable Filter (RSR)
Room-side Replaceable Filter and Motor Assembly (RSRE)
Infrared Speed Control: Room-side airflow adjustment with a hand-held remote control
Duct Collar 10" (254 mm) , 12" (305 mm) and 14" (355.6 mm) for direct connection to the air conditioning supply
Flow-through light fixture provides illumination with minimal airflow disruption
Powder coat white paint or stainless steel housing
Room-side 3/8" Challenge Ports: Convenient aerosol challenge and HEPA filter testing. Standard on RSE and RSRE units
CE certified on 230 V units
ULPA 99.9995 % at 0.12 µm PTFE and low boron.
3/4" Knife Edge for easy placement in gel track ceiling grid system (only on RSR and RSRE units)
MERV 8 pre-filter available

New Universal Control Card
Network Speed Control, MOBUS RTU
Manual Speed Control, On-Board Potentiometer
Analog Speed Control, Remote 0-10 V
Electronically Commutated (EC) brushless motor with internal microprocessor
Backward-inclined centrifugal fan
Walkable Plenum rated 250 lbs without prefilter
Washable prefilter
In accordance with IEST recommended practices.

MAC 10® LEDC Fan Filter Unit, 2'×4', 115 V, 950 ft³/min, Envirco
MAC 10® LEDC Fan Filter Unit, 2'×4', 220 V, 950 ft³/min, Envirco
MAC 10® LEDC Fan Filter Unit, 2'×4', 277 V, 950 ft³/min, Envirco
MAC 10® LEDC Fan Filter Unit, 2'×4', 115 V, 850 ft³/min, Envirco
MAC 10® LEDC Fan Filter Unit, 2'×4', 220 V, 850 ft³/min, Envirco