MAC 10® ORIGINAL RSRE Fan Filter Unit, 2'×4', 120 V, Envirco (CAT#: STEM-C-0359-ZJF)

MAC 10® ORIGINAL RSRE Fan Filter Unit manufactured by Envirco provides clean air for critical environments, with low noise, low consumption, low profile and the room side replaceable filter and motor/blower assembly.
The MAC 10® Fan Filter Unit is the first to combine low noise, low consumption and low profile.
The MAC 10® Original Standard 2'×4' offers one of the lowest sound levels in the industry, as low as 51 dBA.
The unit operates at only 310 watts @ 90 fpm, which reduces operating costs by consuming less than conventional FFUs.
The unit has a low profile of less than 13" (330 mm).
The RSRE unit has the room side replaceable filter and motor/blower assembly.

Brands: Envirco®
Voltage: 120 V
Frequency: 60 Hz
Phase: 1
Full Load Current: 3.0 A
Optional Duct Inlet Connection Size:
10 in (254mm)
12 in (305mm)
Additional Description:
3 Speed Switch
Industry Standards / Certifications: UL Listed (115 V, 208-240 V, 277 V) with standard UL900 filter, File number E152685 (UL507)
Filter Type: High Efficiency Particulate Air (HEPA): 99.99% at 0.3µm
Filter Housing Material: Mill Finished Aluminum
Orientation: Horizontal

Performance
Nominal Unit Size: 2'×4'
Active Filter Face Area: 5.3 ft²
Maximum Air Flowrate: 610 ft³/min
Energy Consumption Rate at Maximum Air Flowrate: 300 W
Air Flowrate at 90 Feet per Minute (ft/min) Average Speed: 470 ft³/min
Energy Consumption Rate at 90 Feet per Minute (ft/min) Average Speed: 245 W
Sound Level at 90 Feet per Minute (ft/min) Average Speed: 51 dBA
Unit Weight: 71 lb

Dimensions
Dimension A: 23.63 in (600mm)
Dimension B: 47.63 in (1210mm)
Dimension C: 14.62 in (371mm)

Options
Solid-State Speed Control for 2'×4' units for a full range of settings
room side Replaceable (RSR) filter
RSRE: Room side replaceable filter and motor/blower assembly
Ultra-low Penetration Air (ULPA) Filter: 99.9995 % efficient at 0.12 µm (U15)
PTFE boron-free ULPA filter
Airflow Indicator Light for external monitoring of motor operation. Green indicator indicates normal operation.
Monitoring and Control System: On-site or remote monitoring and adjustment
CE Marked: 230 V units available
Duct Collar 10" (254 mm) and 12" (305 mm) for direct connection to the air conditioning supply (shipped loose)
Fluorescent Light: Provides illumination with minimal airflow disruption
Ion Bar: Neutralizes static charges below the filter (power supply required)
Finish: Powder coat painted or stainless steel
Room side 3/8" Challenge Port and Static Port: Offers convenient aerosol challenge and filter testing
3/4" Knife Edge for easy placement in gel track ceiling grid system (only on RSR and RSRE units)
Custom sizes and configurations for mini-environment or specific applications
Metric sizes available

Low noise, low consumption, low profile and low operating costs
3 speed control for low, medium and high gear adjustment is standard on 2'×4' units
Solid state speed controller is standard on 2'×2', 2'×3' and RSR units.
Fan is forward-curved centrifugal.
Snap-in prefilter can be easily removed for replacement and maintenance.
Walkable Plenum rated 250 lbs without prefilter
Housings made of aluminum, mill finished.
All units in accordance with IEST standards

MAC 10® ORIGINAL RSRE Fan Filter Unit, 2'×4', 220 V, Envirco
MAC 10® ORIGINAL RSRE Fan Filter Unit, 2'×4', 277 V, Envirco
MAC 10® ORIGINAL RSRE Fan Filter Unit, 2'×3', 120 V, Envirco
MAC 10® ORIGINAL RSRE Fan Filter Unit, 2'×3', 220 V, Envirco
MAC 10® ORIGINAL RSRE Fan Filter Unit, 2'×3', 277 V, Envirco
MAC 10® ORIGINAL RSRE Fan Filter Unit, 2'×2', 120 V, Envirco
MAC 10® ORIGINAL RSRE Fan Filter Unit, 2'×2', 220 V, Envirco
MAC 10® ORIGINAL RSRE Fan Filter Unit, 2'×2', 277 V, Envirco