Masterflex High-Pressure Peristaltic Pump, Mid-Flow Range, Standard, Max Flow 25.3 GPH, 125 PSI; 220 VAC, Cole-Parmer (CAT#: STEM-DS-0150-LC)

Masterflex High-Pressure Peristaltic Pump is manufactured by Cole-Parmer. Depending on model and configuration, the maximum flow rate can reach 158.5 GPH, can the maximum pressure is 125 psi. The output is not affected by back pressure changes

Max Flow Rate (mL/min): 3200
Min Flow Rate (mL/min): 0.6
Max Flow Rate (LPH): 192
Max Flow Rate (GPH): 25.3
Max Flow Rate (Strokes/min): 125
Max Pressure (PSI): 125
Suction Lift, Wet (in H₂O): 360
Suction Lift, Wet (mm of H₂O): 9144
Power (VAC): 220
Power (Hz): 50
Wetted Materials: LLDPE, Norprene, PVC, PVDF
Inlet Connection: 3/8" compression
Outlet Connection: 3/8" compression
Repeatability: ±0.5%
Accuracy: ±0.5%
Max Temperature (° F): 185
Max Temperature (° C): 85
Viscosity, Max (cP): 12000
Duty Cycle Continuous: Yes
Height (in): 15.25
Width (cm): 27.3
Length (in): 8.125
Height (cm): 38.7
Width (in): 10.75
Length (cm): 20.6
CE Regulatory Approval: Yes
ETL Regulatory Approval: Yes

Selection from three versions based on application requirements
Mid-range models with maximu flow of 33.3 GPH (126 LPH) and maximum pressure of 125 PSI (8.6 bar)
NEMA 4X (IP66) Washdown
The outputs include three, dry contact or maximum 30 VDC / 115 VAC

Allegro™ I Peristaltic Pump System, Flow Rates Up To 1500 ml/min, KD Scientific (CAT#: STEM-DS-0040-LSY)
Allegro™ III Peristaltic Pump System, Flow Rates Up To 2000 ml/min, KD Scientific (CAT#: STEM-DS-0042-LSY)