Masterflex L/S® Digital Process Drive with Easy-Load® II Pump Head for High-Performance Tubing, Stainless Steel Housing, 0.1 to 600 rpm; 90 to 260 VAC, Cole-Parmer (CAT#: STEM-DS-0065-LC)

The Masterflex L/S® Digital Process Pump System manufactured by Cole-Parmer is suitable for automatic process applications. It provides analog remote control and programmable dispense interval via the simple membrane keypad. The dispense and display accuracy is ensured by programmed calibration.

Pump Series: L/S
Control Type: Variable-Speed Digital
Min RPM: 0.1
Max RPM: 600
Number of Channels: 1
Max Flow Rate Per Channel (mL/min): 1700
Min Flow Rate Per Channel (mL/min): 0.28
Drive: 07575-30 (L/S® Digital Console Process Drive)
Pump Head: 77200-62 (L/S® Easy-Load II Pump Head)
Tubing: 06434-24, 10-ft (C-FLEX® Ultra, L/S® 24)
Tubing sizes accepted: L/S® 15, 24, 35, 36
Drive IP rating: IP 66
Power (VAC): 90 to 260
Power (amps): 2.2A at 115v; 1.1A at 230v
Power (Hz): 50/60
Width (in): 9
Height (in): 9.31
Length (in): 14.58
Width (cm): 22.86
Height (cm): 23.65
Length (cm): 37.03
Open-Head Sensor: No
Housing Material: Stainless Steel

The pump performance and operation mode (continuous operation, timed dispensing, copy dispensing, and volume dispensing) are displayed on the digital interface with graphic LCD
Remote control of voltage, current and contact closure via analog communication
Dispensing by volume, compy or time
Anti-drip function for accurate dispensing
Open head sensor stops the drive if the pump head is opened
NEMA 4X (IP66) rated shell for washdown applications
Depending on drive rpm and tubing size, the flow range is 0.28 to 1700 mL/min

Masterflex Digital Drive, Cloud-Enabled with MasterflexLive™, Open-Head Sensor, and Easy-Load® II Pump Head for Precision Tubing, SS Housing, Cole-Parmer (CAT#: STEM-DS-0060-LC)