Micro AS Autosampler, Thermo Fisher Scientific (CAT#: STEM-CPO-0588-ZJF)

The manufacturer of the Micro AS Autosampler, Thermo Fisher Scientific is Thermo Fisher Scientific.
Thermo Micro AS autosampler (m/n 920). The Finnigan Micro AS autosampler offers a wide variety of capabilities for HPLC. It is designed for routine analysis and method development, and is fully compatible with a variety of plate types and with other laboratory equipment.

Condition: Refurbished, Certified Pre-owned
Sound pressure level: Less than 70 dB (Leaq)
Working temperature: 5 to 40 °C
Storage temperature: -25 to +60 °C
Humidity: 20% to 80% relative humidity
Sample viscosity: 0.1 to 5 cP
Plates:
Types: 48 vials, 96 low, 96 high, 384 low
Maximum height vials: 47 mm (incl. cap)
Minimum height vials: 12.5 mm (incl. cap).
Only plates of rigid material can be used.
Vial dimensions:
6 × 8 vials, dimensions base plate 128 × 85.8 mm
Maximum outer diameter for 48-vials: 12 mm
Reagent/transport vials: Dimensions 10 mL vials: 22 × 47 mm (maximum height including cap)
Loop volume: 5 to 20 μL
Puncturing needle accuracy: ± 0.5 mm
Pre-puncturing septa/caps: With air needle, dual needle action
Plate & height detection: Missing plate & height detection by vial sensor
Plate tray drive: Greater than 5 cm/s
Sample cooling:
Built-in Peltier cooling processing unit
Programmable Range : 4 °C to 40 °C
Cooling capacity: Ambient -12 °C (measured on cooling plate)
Injection valve switching time: (Electrically) Less than 100 ms
Headspace pressure: Built-in compressor
Wash solvent: 250 mL internal wash solvent bottle
Dispenser syringe: 25 μL syringe in Micro mode.
Wetted parts: SS316, PTFE, Tefzel™, Vespel™ Glass, Teflon™, PEEK™, Fused silica

Refurbished to meet manufacturer's specification
In excellent condition
Thoroughly cleaned
Money back guarantee
Certified with warranty

Meta Therm HPLC Column Temperature Control Unit, MetaChem
MS Pump Plus Solvent Delivery System, Thermo Fisher Scientific
MXT715-000 Valve, Rheodyne