Minipore UHFP-A Ultra Highflow Filter Cartridge, Outside Diameter 6"/152mm, Minipore (CAT#: STEM-GMAE-3453-LGZ)

Material Of Constructions
• Filter media: Pleated glass fiber, Pleated PP, Melt Blown PP
• Support/Drainage: Polypropylene(PP)
• End caps:Glass fiber reinforced Polypropylene
• O-ring seal:EPDM, NBR

Recommended Operating Conditions
• Maximum Operating Temperature: Pleated glass fiber 121℃ / Pleated PP 82℃ / Melt Blown PP 65℃;
• Maximum Differential Pressure: Pleated glass fiber4.0bar / Pleated PP4.0Bar / Melt Blown PP2.5Bar ;
• Recommended Change out Differential Pressure: 1.5Bar at 20℃
• Suggested Flowrate of water: 250 - 660LPM/20"L; 500 - 1,300LPM/40"L; 800 - 1,900LPM/60"L

Cartridge Dimensions
• Removal Ratings:1um, 4.5um, 6um, 10um, 20um, 40um, 70um, 100um
• Outside Diameter: 6"/152mm
• Length: 20"/528mm, 40"/1022mm, 60"/1538mm

Gradient pore structure.
Up to 110M3/H flow rate per filter cartridge for water filtration.
Maximum 50% reduction of filter system.
20", 40" and 60" lengths are available.
All contaminants can be removed off inside the cartridge by the inside - out flow direction.

Minipore LDS Lenticular Disc Stack Filter Cartridge, Polypropylene(PP), Minipore (CAT#-STEM-GMAE-3459-LGZ)
Minipore SW String Wound Cartridge Filters, Maximum Differential Pressure 4.5bar at 25℃, Minipore (CAT#-STEM-GMAE-3454-LGZ)
Minipore SSP Stainless Steel Pleated Cartridge Filters, Support Layer SS, Minipore (CAT#-STEM-GMAE-3455-LGZ)
Minipore RE SIN-1 Softener Resin Filter Cartridge, Minipore (CAT#-STEM-GMAE-3456-LGZ)
Minipore PCP Series Polyester Cellulose Pleated Cartridge Filters, 52℃, Minipore (CAT#-STEM-GMAE-3457-LGZ)
Minipore PM Nominal Rated PP Melt Blown / Spun Cartridge Filters, 80℃, Minipore (CAT#-STEM-GMAE-3458-LGZ)