Unlock Exclusive Discounts & Flash Sales! Click Here to Join the Deals on Every Wednesday!

Minisart® Syringe Filters, 0.45µm/28mm, PES, Sterile, Model FF345-50pcs, Sartorius (CAT#: STEM-L-1781-LKN)

Highlights

Features:
Convenient and available at any time.
Easy to operate.

Cat Number: STEM-L-1781-LKN

Application: Sterile filtration

Model: FF345-50pcs

Add to Cart



Description

Minisart® Syringe Filters, 0.45µm/28mm, PES, Sterile, model FF345-50pcs is manufactured by Sartorius. This product is a disposable sterile syringe filter, used with disposable syringes to quickly removes fine particles from liquid samples by filtration. The filter membrane is made of hydrophilic polyethersulfone (PES), with a pore size of 0.45µm, a shell diameter of 33mm, an effective membrane diameter of 28mm, and an effective membrane area of 6.2cm2. The syringe filter has low protein adsorption, low dissolution, high flow rate, high total flux, and the highest flux can reach 200ml (the content of fine particles will affect the highest flux). It does not require membrane replacement and filter cleaning. It is the most widely used in life science laboratories, mainly used for pre-filtration and clarification of small-volume samples such as cell culture media, buffers, proteins, additives, various reagents or drugs, especially suitable for virus packaging filtration. It is also the preferred method for HPLC and GC small sample filtration.

Specification

Packaging: 50 per box.

Performance Parameters:
Aperture: 0.45 µm.
Effective membrane diameter: 28 mm.
Flow rate: 220 mL/min with water at 1 bar (14.5 psi).
Filter area: 6.2 cm2.
Wettability: Hydrophilic.
Sterility: Ethylene Oxide.
High flow rate: Yes.
Membrane material: Polyethersulfone (PES).
Packing: γ-ray sterilization, independent packaging.
Color: Dark Blue.
Connector entrance: Female Luer Lock.
Connector outlet: Male Luer Slip.
Filter housing diameter: 33 mm.
Operating pressure: 4.5 bar.
Residual volume: 100-150 µL before bubble point.
Burst pressure: Min. value 7.0 bar (102 psi).
Bubble point: minimum water value 3.2 bar (320 kPa, 46 psi).
Shell size: 33 × 26 mm.
Maximum pressure: 6 bar (87 psi).
Maximum temperature: 60°C.
Biological safety: The material of all components of the filter has passed the current USP plastic VI biological response test <88> (systemic injection, intradermal and implantation tests).
Extract: HPLC certified.
Housing material: Acrylic-based multipolymer compound (MBS).
No fiber dissolution: The product complies with Title 21 of the Code of Federal Regulations (CFR),
Parts 210.3(b) (6) and 211.72.
Total flux: Up to 200 mL.
Sample type: Aqueous, Solvents and harsh liquids according to chemical compatibility.
Ultrafiltration equipment type: Syringe Filters.
Toxicity: According to ISO 10993-5.
pH range: 3.0-12.0.
Sterilization Method: Ethylene oxide.

Features

Features:
Convenient and available at any time.
Easy to operate.
Quality assurance.
Economical and practical.
High flow rate.
100% integrity test during the manufacturing process.

Storage:
Store at room temperature, valid for at least one year.

Precautions:
This syringe filter is a single-use product, and it is not recommended to reuse it, so as to prevent the residue from one sample from being carried to the next sample. However, if the same sample is processed, it can be reused 2-3 times appropriately.
If the needle filter needs to be inserted into a sealed container, please use a suitable disinfectant (such as 70% alcohol) for aseptic treatment on the sealed part. If necessary, attach a sterile needle to the needle filter.
If you want to maximize the recovery of the sample to be filtered, remove the needle filter from the syringe and draw air into the syringe. Reconnect the syringe and needle filter and filter operation, so that the remaining sample can be pushed out. At this time, the applied pressure must exceed a specific bubble point (refer to performance parameters), which will reduce the hold-up to the lowest possible amount.
This product is world-leading in terms of purity, so pre-filtration is usually not required. For very sensitive methods or samples, 1-3ml ultrapure water or buffer can be used for pre-filtration before filtration, which can remove very small amounts of extractables in the syringe filter.
For more precautions, please refer to the "Note" in the Sartorius manual.
This product is limited to scientific research by professionals, and must not be used for clinical diagnosis or treatment, or used for food or medicine, and must not be stored in ordinary residences.
For your safety and health, please wear lab coats and disposable gloves.

Related Products

Acrodisc® Syringe Filters, 0.45μm/25mm, Model FF258T, PALL (CAT#: STEM-L-1774-LKN)
Acrodisc® Syringe Filters, 0.45μm/25mm, Model FF259, PALL (CAT#: STEM-L-1775-LKN)
Acrodisc® Syringe Filters, 0.45μm/25mm, Model FF258, PALL (CAT#: STEM-L-1776-LKN)
Acrodisc® Syringe Filters, 0.2μm/25mm, Model FF251T, PALL (CAT#: STEM-L-1777-LKN)
Acrodisc® Syringe Filters, 0.2μm/25mm, Model FF252, PALL (CAT#: STEM-L-1778-LKN)
Acrodisc® Syringe Filters, 0.2μm/25mm, Model FF251, PALL (CAT#: STEM-L-1779-LKN)
Minisart® Syringe Filters, 0.45µm/28mm, PES, Sterile, Model FF345T-10pcs, Sartorius (CAT#: STEM-L-1780-LKN)
Minisart® Syringe Filters, 0.45µm/28mm, PES, Sterile, Model FF345-50pcs, Sartorius (CAT#: STEM-L-1781-LKN)
Minisart® Syringe Filters, 0.45µm/28mm, PES, Sterile, Model FF345-10pcs, Sartorius (CAT#: STEM-L-1782-LKN)
Minisart® Syringe Filters, 0.22µm/28mm, PES, Sterile, Model FF342T-10pcs, Sartorius (CAT#: STEM-L-1783-LKN)
Minisart® Syringe Filters, 0.22µm/28mm, PES, Sterile, Model FF342-50pcs, Sartorius (CAT#: STEM-L-1784-LKN)
Minisart® Syringe Filters, 0.22µm/28mm, PES, Sterile, Model FF342-10pcs, Sartorius (CAT#: STEM-L-1785-LKN)
BeyoGold™ Syringe Filters (0.22µm/33mm, PES, Sterile), Model FF362-10pcs, Beyotime (CAT#: STEM-L-1786-LKN)
BeyoGold™ Syringe Filters (0.22µm/33mm, PES, Sterile), Model FF362-100pcs, Beyotime (CAT#: STEM-L-1787-LKN)
BeyoGold™ Syringe Filters (0.45µm/33mm, PES, Sterile), Model FF365-10pcs, Beyotime (CAT#: STEM-L-1788-LKN)
BeyoGold™ Syringe Filters (0.45µm/33mm, PES, Sterile), Model FF365-100pcs, Beyotime (CAT#: STEM-L-1789-LKN)
BeyoGold™ Syringe Filters (0.22µm/13mm, PES, Sterile), Model FF372-10pcs, Beyotime (CAT#: STEM-L-1790-LKN)
BeyoGold™ Syringe Filters (0.22µm/13mm, PES, Sterile), Model FF372-100pcs, Beyotime (CAT#: STEM-L-1791-LKN)
BeyoGold™ Syringe Filters (0.45µm/13mm, PES, Sterile), Model FF375-10pcs, Beyotime (CAT#: STEM-L-1792-LKN)
BeyoGold™ Syringe Filters (0.45µm/13mm, PES, Sterile), Model FF375-100pcs, Beyotime (CAT#: STEM-L-1793-LKN)
Advertisement