Mold Incubator BPMJ, -5～70℃, 520×550×1050 mm, Shanghai Yiheng Scientific Instruments Co., Ltd (CAT#: STEM-CC-0030-YJL)

Mold Incubator BPMJ, -5～70℃, 520×550×1050, model BPMJ-250F is manufactured by Shanghai Yiheng Scientific Instruments Co., Ltd. The new generation of incubators, based on the company's more than ten years of experience in design and manufacturing, conform to the world's environmental protection trends, and have always been in a leading position in the technology of incubator products. In line with the concept of humanized design, starting from the actual needs of customers, and trying to meet customer requirements in every detail, is customers provide high-quality incubator series products.

Temperature Range: -5～70℃
Temperature Resolution: 0.1℃
Temperature Stability: HIGH±0.3℃，LOW±0.5℃
Temperature Uniformity: ±1.5℃(Test Point: 25℃)
Voltage: AC220V 50HZ
Working Temperature: +5～35℃
Input Power: 1300W
Interior Dimension(W×H×D)(mm): 520×550×1050
Shelves(Standard): 3pcs
Timing Range: 0～5999min

◆Humanized design
● The new none fluorine design keeps you at the forefront of healthy life.
● Large-screen LCD display, multiple groups of data displayed on one screen, menu-type operation interface, simple and easy to understand, easy to observe and operate.
● It adopts mirror surface stainless steel liner, and the four corners are semi-circular arc transition. The shelf bracket can be freely installed and removed, which is convenient for the cleaning work of the studio.
● The left side of the box is equipped with a test hole with a diameter of is25mm, which can be arbitrarily wired according to the needs of the place.
● Put a shaker into the box to conduct constant temperature shaking culture.

◆Quality Assurance
● Adopt international brand compressor and circulation fan, unique air duct circulation system to ensure uniform working temperature and humidity.
● Fuzzy PID controller, precise temperature control and small fluctuation, with Timing function.

◆Circulating fan speed automatic control
● The speed of the circulating fan can be automatically controlled. When the temperature in the box is at a constant temperature, the speed will decrease, and the circulating wind speed will be adjusted to the wind speed suitable for cell growth to avoid volatilization of the sample due to excessive air volume during the test.

◆Self-diagnosis function
● When the incubator is faulty, the LCD screen will display fault information, and the operation fault point will be clear at a glance.

◆LCD multi-segment programmable controller
● Multi-segment liquid crystal programmable controller, one-screen display of various parameters, menu-type operation interface, which can simplify the complex test process and truly realize automatic control and operation.
● Parameters such as multi-stage temperature, circulating air speed, time and heating rate can be set and programmed at the same time. Gradient control of temperature rise can be performed, functions such as slow heating from the initial temperature in the box, etc., and functions such as automatic startup, standby and shutdown can also be preset.
● 7 groups of 63-step programmable programs can be preset, 9 steps in each group, and the setting time for each group is 0 to 5999 minutes.

◆Convenient data processing (optional)
● It can be connected to a printer or 485 communication interface, with a USB data transfer interface (U disk), which can be displayed on a computer, and can print the temperature and time, which provides a strong guarantee for the storage and playback of the test process data.

◆Security function
● Independent temperature limit alarm system, if the temperature exceeds the limit, the operation will be automatically interrupted, and the sound and light alarm will prompt the operator to ensure the safe operation of the experiment without accidents. (standard)
● High temperature and over temperature will automatically alarm.

◆Ultraviolet sterilization system (optional or mold incubator has this function)
● The ultraviolet germicidal lamp is located on the top of the box, which can disinfect the inside of the box regularly, effectively killing the floating bacteria in the circulating air in the box, thus effectively preventing the pollution during cell culture.

Mold Incubator MJ(CAT#: STEM-CC-0014-YJL)
Mold Incubator MJ(CAT#: STEM-CC-0015-YJL)