Morui MR-3013-400 Reverse Osmosis Membrane, 1.5m2, Morui (CAT#: STEM-GMAE-5006-LGZ)

Center tube with different colors.
All products are from the latest production line.
Advanced quality control and test method.

Membrane area(m2): 1.5
Average yield(GPD): 400(1.5)
Water yield(ML/min): 1.2-1.4

Usual type
Operating pressure(Psi/Mpa): 65(0.45)
Salt rejection(%): 95.8-97.3

NF
Operating pressure(Psi/Mpa): 0.2Mp
Salt rejection(%): 60-90

Waste water ratio: 1:1
Filtration: 0.0001 micron
Material: TFC
Feed silt Density Index(SDI): ≤ 4
Free Chlorine Concentration(mg/l): ≤ 2mg/L
Inlet water turbidity: ＜1
Inlet water(organics): ＜1.5
Maximum Operating Pressure: 1MPa(150Psi)
Maximum Operating Temperature: 45℃
Maximum Feed Silt Density Index: 5
Maximum Inlet water turbidity: ≦1NTU
pH range: 2–11

Large water yield.
The raw material use Food-Grade polymeric membrane, healthy and environmentally friendly.
Sage and reliable, Long service life.

Morui MR-BW-2540 Brackish Water RO Membranes, 28(2.6)ft²(m²), Morui (CAT#-STEM-GMAE-5012-LGZ)
Morui MR-BW-4040 Brackish Water RO Membranes, 78ft²(7.2m²), Morui (CAT#-STEM-GMAE-5007-LGZ)
Morui MR-LP-4040 Low Pressure RO Membranes, 78ft²(7.2m²), Morui (CAT#-STEM-GMAE-5008-LGZ)
Morui MR-BW-8040 Brackish Water RO Membranes, 400ft²(37m²), Morui (CAT#-STEM-GMAE-5009-LGZ)
Morui MR-LP-8040 Low Pressure RO Membranes, 400(37)ft²(m²), Morui (CAT#-STEM-GMAE-5010-LGZ)
Morui MR-BW-2521 Reverse osmosis membrane, 13(1.2)ft²(m²), Morui (CAT#-STEM-GMAE-5011-LGZ)