Multi Box Vacuum Drying Oven BPZ, 380×600×620 mm, Shanghai Yiheng Scientific Instruments Co., Ltd (CAT#: STEM-GLE-0246-YJL)

Multi Box Vacuum Drying Oven BPZ, 380×600×620 mm, model BPZ-6140-3 is manufactured by Shanghai Yiheng Scientific Instruments Co., Ltd. The studio of this product is made of stainless steel plate, and the vacuum chamber is rectangular, which can make full use of the space.

Power Supply: AC220V 50HZ
Input Power: 3100W
Temperature Range: RT+10～200℃
Temperature Resolution/Fluctuation: 0.1℃ /±1℃
Vacuum degree: 133Pa
Vacuum Gauge: Mechanical pointer type
Ambient temperature: ＋5～40℃
Inner Size(mm)W×D×H: 380×600×620(single layer)
Outer Size(mm)W×D×H: 880×980×1910
Rack: 2pcs(Independent temperature control)×3
Testing Room Material: Stainless Steel304 (1Cr～18Ni9Ti) / Electrostatic Spraying Process
Vacuum Gauge: Imported Vacuum Gauge

● The studio is made of stainless steel plate to ensure the durability of the product. The outer box can be selected from all stainless steel SUS304 material, which is easy to clean.
● The rectangular vacuum chamber can make full use of the space.
● The flexible double-layer tempered glass door can observe the objects in the studio clearly at a glance.
● The closed tightness of the box door can be adjusted, and the integrally formed synthetic silicone rubber door seal ensures a high degree of vacuum in the box.
● Independent temperature limit alarm system, if the temperature exceeds the limit, it will be automatically interrupted to ensure that there will be no accidents in the experimental operation. (optional)
● Each layer of the box can be independently heated, vacuumed, and nitrogen injected independently without interfering with each other.
● Imported vacuum pump with low noise, stable and reliable vacuum control.
● Multi-layer partitions and LED lighting can be added (optional)
Partition direct heating and control
● Each shelf has a separate temperature sensor, and a separate control loop has a precise response to the drying of different loads, and each shelf used can be independently displayed and controlled in setting, monitoring temperature and timing; heating elements It is placed directly under the shelf, so it will not cause temperature deviation, the measurement is more accurate, and the temperature control is more stable; the heating and operation time is shortened by more than 50% compared with the heating time of the bundled heating type around the inner tank.

◆Program control (optional)
● Program control operation, heating, vacuum holding and nitrogen holding time can be set according to process requirements to ensure the consistency of baking in each batch.

Desktop Vacuum Drying Oven DZF Series(CAT: STEM-GLE-0187-YJL)
Vacuum Drying Oven BPZ-LC Series(CAT: STEM-GLE-0210-YJL)
Vacuum Drying Oven-Microprocessor Controller (With Timing)(CAT: STEM-GLE-0222-YJL)
Vacuum Drying Oven-Electronic Semiconductor(CAT: STEM-GLE-0229-YJL)