MultiLab IDS 4310 Conductivity and Temperature Sensor, YSI (CAT#: STEM-AIAE-0389-ZJF)

The MultiLab IDS 4310 Conductivity and Temperature Sensor is manufactured by YSI.
IDS 4310 digital conductivity/temperature probe for the YSI MultiLab. Features an epoxy body, 4-graphite electrodes, and a 1.5 meter cable.
It is an accessory for the following products:
MultiLab 4010-1W Laboratory Instrument
MultiLab 4010-2W Laboratory Instrument
MultiLab 4010-3W Laboratory Instrument

SKU: 301710Y
Cell Constant: 0.475 cm-1 ±1.5 %
Equipment used with: MultiLab Instruments
Measurement Range: Conductivity: 1 µS/cm to 2,000 mS/cm | Resistivity: 0.5 Ohm cm to 100 kOhm cm | Salinity: 0.0 to 70.0 ppt | Total Dissolved Solids: 0 to 1,999 mg/L; 0.0 to 199.9 g/L | Temperature: 0 to 100ºC
Minimum Immersion Depth: 36 mm
Parameters Measured: Conductivity, Temperature
Storage Temperature: 0 to 50 °C
Warranty: 2 years

Conductivity and temperature
Epoxy body
4-graphite electrodes
Digital probe
5 or 10ft (1.5 or 3m) cable

MultiLab 4010-1W Laboratory Instrument, YSI
MultiLab 4010-2W Laboratory Instrument, YSI
MultiLab 4010-3W Laboratory Instrument, YSI
MultiLab IDS 4310-3 Conductivity and Temperature Sensor, YSI
MultiLab IDS 4310W Conductivity and Temperature Wireless Sensor, YSI
MultiLab IDS 4320W Conductivity and Temperature Wireless Sensor, YSI