Neptune 547-S-N5 Hydraulically Actuated Diaphragm Pump, PVC and PTFE Wetted End, 30.0GPH @ 300PSI, Cole-Parmer (CAT#: STEM-DS-0933-LC)

The Hydraulically Actuated Diaphragm Pump manufactured by Cole-Parmer provide metering accuracy lower to ±1%. The pump drive assembly is completely enclosed and runs in an oil bath to minimize friction and wear, and to fit the harsh environment.

Max Flow Rate (mL/min):188
Max Flow Rate (Strokes/min):144
Max Pressure (PSI):300
Suction Lift, Wet (in H₂O):60
Suction Lift, Wet (mm of H₂O):1524
Motor Type:TEFC
Power (VAC):115
Power (Hz):60
Output:1/2" NPT(M)
Wetted Materials:Glass, PTFE, PVC
Accuracy:±1%
Turndown Ratio:10:1
Max Temperature (° F):125
Max Temperature (° C):51
Viscosity, Max (cP):1000
Duty Cycle Continuous:Yes
Diameter (in):13/16
Height (in):15
Width (cm):50.8
Length (in):7
Height (cm):38.1
Width (in):20
Length (cm):17.8
Motor hp:1/2

Internal bypass improves valve performance
The capacity of the pump capacity can be adjusted between 0 to 100% with a micrometer knob

GM-100 Diaphragm Pump 125mbar, Evacuation Speed 60 l/min, UniEquip (CAT#: STEM-DS-0166-LSY)
N 840 FT.18 Diaphragm Pump 2mbar, Deliverry 34 l/min, UniEquip (CAT#: STEM-DS-0167-LSY)
N 840.3 FT.18 Diaphragm Pump 8mbar, Deliverry 34 l/min, UniEquip (CAT#: STEM-DS-0168-LSY)
N 811 KN.18 Mini Diaphragm Pump 240mbar, Deliverry 11.5 l/min, UniEquip (CAT#: STEM-DS-0169-LSY)