Neptune PZiG-500-FTCT Feed-Verification Diaphragm Metering Pump, 8.4 GPH, PVDF head, PTFE Diaphragm, Cole-Parmer (CAT#: STEM-DS-1173-LC)

The Neptune Feed-Verification Diaphragm Pump manufactured by Cole-Parmer deliveries consistant flow rate. The optional flow checker installed directly onto the discharge end of the pump is a simple oval gear meter used to verify flow rates.

Max Flow Rate (mL/min):530
Max Flow Rate (LPH):31.8
Max Flow Rate (GPH):8.41
Max Flow Rate (Strokes/min):300
Max Pressure (PSI):100
Power (VAC):94 to 264
Power (Hz):50/60
Wetted Materials:PTFE, PVDF
Max Temperature (° F):104
Max Temperature (° C):40
Viscosity, Max (cP):50
Duty Cycle Continuous:Yes
Height (in):10.625
Width (cm):24.8
Length (in):5.875
Height (cm):27
Width (in):9.75
Length (cm):14.9

High stroke per minute can ensure a more even distribution of fluid at low flow rates
Very suitable for outdoor use, waterproof and UV protection
Optional flow checker for meansurement of the pump output

Walchem EZB30D2-PC Manual Control Pump with GFRPP Head, Cole-Parmer (CAT#: STEM-DS-1109-LC)
Pulsafeeder LE44SA-VTC1 Manual Control Metering Pump, Cole-Parmer (CAT#: STEM-DS-1084-LC)
Pulsafeeder LE44SB-VTC1 Manual Control Metering Pump, Cole-Parmer (CAT#: STEM-DS-1085-LC)
Pulsafeeder LEG5SB-VTC3-XXX Manual Control Metering Pump, Cole-Parmer (CAT#: STEM-DS-1087-LC)