New Brunswick Scientific Galaxy 48R CO2 Incubator, Eppendorf (CAT#: STEM-CC-2219-LGZ)

The manufacturer of New Brunswick Scientific Galaxy 48R CO2 Incubator is Eppendorf . Model is Galaxy 48R. State-of-the-art displays and controls enable comprehensive and rapid analysis. 72 hours of continuous data logging of temperature, alarms, door openings, provides a detailed record of environmental conditions and quickly troubleshoots unexpected results. Ability to quickly change ambient and alarm settings via an intuitive controller. Diagnostic interface, system parameters and functions can be displayed. Password protected secure programmable settings and alarm set points. On-screen troubleshooting and help.

Condition: used
BioCommand® software is optional
Exterior door observation window standard
Shelf with hole: standard
Seamless box: standard
Display readings: temperature and CO2 concentration, 72-hour data/graphic recording, alarm setting
Temperature range: 4 °C to 50 °C above ambient temperature
Fine gas pressure relief valves: standard
Capacity: 48 L (1.7 ft³)
Display: Standard display screen
Power supply: 230 V, 50  --  60 Hz
Size (length x width x height): 48.9 x 49.7 x 65.2 cm / 19.3 x 19.6 x 25.7 in
Weight (excluding accessories): 31.8 kg  / 70.1 lb
Segmented door scheme: 2 minutes inside door
Temperature control increment: ±0.1 °C
Temperature stability at 37 °C: ±0.1 °C
Temperature range: ambient temperature +4 °C to 50 °C
Temperature uniformity: ±0.3 °C
CO2 range: 0.2--20%
CO2 control increment: ±0.1 %
CO2 stability at 5% CO2: ±0.2 %
CO2 homogeneity: ±0.1 %
Shelf quantity (standard/Max) : 3/6
Data export interface: RS-232
Stage (B), Stage (U), Fall (F) or Stack (S) : B, U, F, S (x2)
Access port: 1
Onboard data recording: standard
BMS relays: standard

1. Small CO2 incubator: The total volume is 48 L / 1.7 FT3, and the available space and space ratio are high.
2. Scope of application: limited laboratory space, small sample size, cell line isolation/isolation, personal work area.
3. The internal use space is larger and the footprint is smaller: no fan inside, two stackable devices.
4. Cleaning is easy, reliable contamination protection: seamless stainless steel housing, sterilization at 120 °C (4 hours), no fan, two-section inner door (optional).
5. Enhanced anti-vibration and turbulence function: Fanless internal design.
6. Uniform atmosphere: six-sided direct heating (including windows) and infrared CO2 sensor (instead of temperature and humidity sensitive TC sensor).
7. Undisturbed when checking cells: Exterior door with heated window.
8. Keep your community safe: Integrated alarm/Building Management System (BMS) relays and 72-hour data logging.
9. Reduce the number of CO2 cylinder replacements: Air consumption is low.
10. Optional: 120 °C sterilization, two-stage inner door, oxygen control (for hypoxia experiments), humidity monitoring, stacking kit.

Thermo Forma 380 CO2 Incubator, Thermo Fisher Scientific(CAT#-STEM-CC-2104-LGZ)
Forma 3950 Reach In CO2 Incubator, Thermo Fisher Scientific(CAT#-STEM-CC-2105-LGZ)
Napco 5400 CO2 Water Jacketed Incubator, Thermo Fisher Scientific(CAT#-STEM-CC-2107-LGZ)
Fisher Scientific Isotemp 3532 CO2 Incubator, Thermo Fisher Scientific(CAT#-STEM-CC-2117-LGZ)
VWR 1310 Gravity Convection Incubator, Avantor(CAT#-STEM-CC-2126-LGZ)
Thermo Forma 3EG Gravity Convection Incubator, Thermo Fisher Scientific(CAT#-STEM-CC-2127-LGZ)