Nexera X2 UHPLC System, Shimadzu (CAT#: STEM-CPO-0660-ZJF)

The manufacturer of the Nexera X2 UHPLC System, Shimadzu is Shimadzu.
Refurbished Shimadzu Nexera X2 UHPLC system complete with 2 each Nexera X2 LC-30AD Pumps (p/n 228-45162-58), Nexera X2 SIL-30AC (p/n 228-45157-58), Nexera X2 CTO-30A Column Oven (p/n 228-45160-58), CBM-20A Controller (p/n 228-45012-59), DGU-20A5R Degasser (p/n 228-45019-58), and reservoir tray (p/n 228-45041-91).

Condition: Refurbished, Certified Pre-owned
LC-30AD:
Degassing Unit: 3 or 5 Lines (Volume 400 μL)
Flow rate range: 0.0001 to 10 mL/min
Flow rate precision: No more than 0.06% RSD or 0.02 min SD, whichever is greater
Gradient type: High-pressure / low-pressure mixing gradient
Gradient / concentration precision: ±0.5% (specified conditions)
Maximum pressure:
130 MPa (0.0001 to 3 mL/min)
80 MPa (3.0001 to 5 mL/min)
22Mpa (5.0001 to 10 mL/min)
SIL-30ACMP:
Injection method: Needle-in-flowpath
Injection volume accuracy: ±1% (at 50 μL injectiong, n = 10)
Injection volume range: 0.1 to 50 μL (Option: 0.1 to 100 μL)
Injection volume reproducibility: RSD: 0.2% maximum (at 10 μL)
Samples capacity:
Sample plate: 324 (1.5 mL), 576 (96 well MTP/DWP Plates), 2304 (384 well MTP/DWP plates)
Control plate: 10 (1.5 mL)
Sample cooler: Block cooling/heating, used together with defumidifying function 4 to 40°C
CTO-30A:
Oven Capacity: Up to 2 – 150 mm columns
Temperature control range: Room temperature ± 5 to 150°C, Setting range 4 to 150°C
Optional: PC with Shimadzu Labsolutions software & LPGE 30A mixer 228-45180-58

Refurbished to meet manufacturer's specification
In excellent condition
Thoroughly cleaned
Money back guarantee
Certified with warranty

Nexera UHPLC System, Shimadzu
Prominence UHPLC XR System, Shimadzu
RF-20Axs Fluorescence Detector, Shimadzu