Unlock Exclusive Discounts & Flash Sales! Click Here to Join the Deals on Every Wednesday!

ProDIGITAL ODO/CT Cable Assembly, 30 m, YSI, accessory for the ProSolo, ProSwap, and ProDSS handhelds (CAT#: STEM-AIAE-0200-ZJF)

Highlights

Automatically recognized integral optical DO, conductivity, and temperature sensors reduce instrument set-up time.
Automatically compensates DO mg/L measurements for salinity; no need to enter salinity compensation values.
New assemblies are pre-installed with rugged optical DO sensor caps with a 2-year warranty.

Cat Number: STEM-AIAE-0200-ZJF

Application: Probe and cable assembly with integral optical dissolved oxygen, conductivity, and temperature sensors for the ProSolo, ProSwap, and ProDSS handhelds.

Model: 627150-30

Add to Cart



Description

The ProDIGITAL ODO/CT Cable Assembly manufactured by YSI is a probe and cable assembly with integral optical dissolved oxygen, conductivity, and temperature sensors for the ProSolo, ProSwap, and ProDSS handhelds.
It is ideal for measuring DO in estuaries, wetlands, coasts, aquaculture, or any application requiring accurate, real-time salinity-compensated measurements.
Pre-assembled ProSolo ODO/CT kits are available.
It offers all the advantages of optical dissolved oxygen technology - higher accuracy, lower maintenance, no stirring required for accurate measurements, and it maintains calibration longer than membrane-covered sensors.
Using the integral sensors, the instrument can be quickly and easily configured, eliminating the need to install sensors before use. With the ProDSS's digital technology, the handheld can recognize connected sensors automatically, so it is not necessary to tell the instrument what sensors are connected.
It is an accessory for the following products:
ProDSS Multiparameter Meter
ProSolo Optical Dissolved Oxygen and Conductivity Meter
ProSwap Digital Water Quality Meter

Specification

SKU: 627150-30
Accuracy:
Temperature - ±0.2 °C
Dissolved Oxygen - 0 to 200%: ±1% of reading or 1% saturation, whichever is greater; 200 to 500%: ±8% of reading 0 to 20 mg/L: ±0.1 mg/L or 1% of reading, whichever is greater; 20 to 50 mg/L: ±8% of reading
Conductivity - 0 - 100 mS/cm: ±0.5% of reading or .001 mS/cm, whichever is greater; 100 - 200 mS/cm: ±1.0% of reading
Specific Conductance - 0 - 100 mS/cm: ±0.5% of reading or .001 mS/cm, whichever is greater; 100 - 200 mS/cm: ±1.0% of reading User selectable reference temperature (15 to 25 °C; default 25 °C) and compensation coefficient (0 to 4%/°C; default 1.91%)
Salinity - ±1.0% of reading or ±0.1 ppt, whichever is greater
Total Dissolved Solids (TDS) - Calculated from specific conductance and a user-selectable TDS multiplier (0.30 to 1.00; default 0.65)
Seawater Density - Sigma is calculated from salinity, temperature, and pressure (depth) Sigma T is calculated from salinity and temperature
Resistivity - ±0.1% Full Scale
Equipment used with: ProDSS, ProSolo
Measurement Range:
Temperature - -5 to 70 °C (temperature compensation range for DO mg/L measurement: -5 to 50 °C )
Dissolved Oxygen - 0 to 500%, 0 to 50 mg/L
Conductivity - 0 to 200 mS/cm
Specific Conductance - 0 to 200 mS/cm
Salinity - 0 to 70 ppt
Total Dissolved Solids (TDS) - 0 to 100 g/L
Seawater Density - 0.0 to 50.0 sigma, sigma T
Resistivity - 0 to 2 Mohms
Resolution:
Temperature - 0.1 °C or 0.1 °F (user selectable)
Dissolved Oxygen - 0.01 mg/L and 0.1%, or 0.1 mg/L and 1% (user selectable)
Conductivity - 0.001, 0.01 or 0.1 mS/cm
Specific Conductance - 0.001, 0.01, 0.1 mS/cm
Salinity - 0.01 ppt
Total Dissolved Solids (TDS) - 0.001, 0.01, 0.1 g/L
Seawater Density - 0.1 sigma or sigma T
Resistivity - 0.001, 0.01, 0.1
Size:
0.97 in. width x 10.29 in. length (2.46 cm x 26.14 cm)
Unit of Measure:
Temperature - °C, °F, K; DO - % saturation, % saturation local, mg/L, ppm; Conductivity - µS/cm, mS/cm; Specific Conductance - µS/cm or mS/cm; Salinity - ppt or PSU; Total Dissolved Solids (TDS) - mg/L, g/L, kg/L; Seawater Density - Sigma, Sigma T; Resistivity - ohm-cm, kohm-cm, Mohm-cm
Warranty:
2-year probe and cable assembly; 2-year extended warranty ODO sensor caps; 1-year ODO sensor caps
Accessories:
YSI ProDSS ODO/CT Replacement Sensor Cap
YSI ProDSS ODO/CT Replacement Calibration Cup

Features

Automatically recognized integral optical DO, conductivity, and temperature sensors reduce instrument set-up time.
Automatically compensates DO mg/L measurements for salinity; no need to enter salinity compensation values.
New assemblies are pre-installed with rugged optical DO sensor caps with a 2-year warranty.
Fits in a 1-inch well
Cable Length: 30 m (available up to 100 m)

Related Products

ProDSS Multiparameter Meter, No GPS, YSI
ProDSS Multiparameter Meter, With GPS, YSI
ProQuatro Multiparameter Meter, YSI
ProSolo Optical Dissolved Oxygen and Conductivity Meter, YSI
ProSwap Digital Water Quality Meter, No GPS, YSI
ProSwap Digital Water Quality Meter, With GPS, YSI