Programmable Electric Thermostatic Incubator, Overall Dimensions 890×675×925 mm, Internal Size 600×540×750 mm, 930 W, Shanghai Boxun Medical Biological Instrument Corp. (CAT#: STEM-GLE-0377-LGH)

Programmable Electric Thermostatic Incubator, BPX-272, Shanghai Boxun Medical Biological Instrument Corp.
1. The shell is made of cold rolled steel plate, the surface is electrostatic sprayed, the inner tank mirror is stainless steel, the baffle can be adjusted arbitrarily;
2. Temperature control system using microcomputer microcomputer technology, LCD screen display various parameters, temperature control with temperature control, timing, overtemperature alarm and other functions;
3. The use of motor and wind blades, reasonable air duct and circulation system, so that the uniformity of temperature changes in the working room is small;
4. The wind speed can be automatically adjusted according to the working state;
5. The door has a glass viewing window with a large Angle of view, which is convenient for users to observe.
6. Using nanomaterial door seal and insulation material to reflect the performance. Be superior to;
7. Programmable program design, can set 10 segments 100 cycles;

Power supply voltage: AC 220V±10%/50Hz±2%
Temperature control range: room temperature +2℃-65℃
Temperature resolution: 0.1℃
Temperature fluctuation: ±0.5℃ (37℃)
Input power: 930W
Tank size (mm) : 600×540×750
Dimensions (mm) : 890×675×925
Load carrier: 3 pieces
Stabilization time: ≤20min
Timing range: 0-99 hours and 60 minutes

Temperature control system using microcomputer microcomputer technology, LCD screen display various parameters, temperature control with temperature control, timing, overtemperature alarm and other functions;
The use of motor and wind blades, reasonable air duct and circulation system, so that the uniformity of temperature changes in the working room is small;
The wind speed can be automatically adjusted according to the working state;