RapidOxy 100 Fuel Oxidation Stability Tester, Up to 180 °C Application Range, Anton Paar (CAT#: STEM-LE-1549-Y)

The RapidOxy 100 Fuel Oxidation Stability Tester is manufactured by Anton Paar. The equipment complies with ASTM D7525, ASTM D7545 and EN 16091 standard methods for fuel analysis. Only 5 ml of sample is required, so it is very suitable for testing expensive antioxidants.

Application range: Up to 180 °C
Re-cooling: Automatic, fan and Peltier
Sample volume :Typically 5 mL
Test cell: Gold-plated aluminum
Pressure range :Up to 1800 kPa
Display: Pressure, temperature, pressure/time curve, time
Oxygen supply: 700 kPa (maximum input)
Power supply: AC 220 V-240 V, 50/60 Hz
AC: 100 V-120 V, 50/60 Hz
Dimensions: 20 cm x 40 cm
Weight: <9 kg

All-in-one fuel system;
Fully comply with ASTM D7525, ASTM D7545, EN 16091 and IP 595;
Preset procedures for standard methods;
5.7-inch large capacitive touch screen with modern design;
Monitor the pressure curve on the display during the measurement;
Real-time display of temperature, time and pressure;
Use soft paper towels and ethanol to clean the test chamber quickly and easily;
No chemicals other than ethanol are needed in the cleaning process;
Sample preparation without chemicals;
A small amount of fuel sample is only 5 mL;
Small footprint (200 mm x 400 mm) with a height of 250 mm;
Weigh less than 9 kg;
Independent instrument (no external PC required);
Excellent reproducibility and repeatability;
The measuring range is up to 180°C;
No sample preparation required;

SVM 3001 Kinematic Viscometer, 0.2 mm²/s to 30 000 mm²/s Viscosity Range, Anton Paar (STEM-LE-1558-Y)
SVM 2001 Kinematic Viscometer, 0.2 mm²/s to 30 000 mm²/s Viscosity Range, Anton Paar (STEM-LE-1559-Y)