SAM 24 H.O. HIGH-OUTPUT, 2'×4', 277V, Clean Rooms International (CAT#: STEM-C-0328-ZJF)

SAM 24 H.O. HIGH-OUTPUT Fan Filter Unit 12502 SAM24 H. O. manufactured by Clean Rooms International provides clean air up to 1,000 CFM for cleanroom applications, ideal for cleanrooms with high ceilings.
SAM 24 H.O. Fan Filter Units can deliver a maximum of 1000 CFM, including a 100mm 99.99% efficient HEPA filter, 2" prefilter, seismic clip suspension points, variable speed control with RFI suppression, and safety switch.
Housings are made of steel with a white powder coating and seismic clip suspension points.
N310 motor blower: energy efficient, single-phase electric power, low watt backward curved impeller, permanent split capacitor, overlheat protection.
HEPA 100mm final filters are protected by a white epoxy diamond pattern grille and are tested in accordance with the Institute of Environmental Sciences (IEST) and ISO standards.
A polystyrene eggcrate grille of CRF Style Units in an anodized aluminum frame can be easily open to replace the filter without removing the unit.

Standard Equipment: N310 Low Watt motor, prefilter, variable speed control with RFI Suppression, safety switch.

Style: NCR
Size: 2'×4'
Motor: N310
Voltage: 277
Hz: 60
Watts: 165
FLA: 0.6
Weight: 90 lbs. (40.8 kg (1.8 lb.).)

NCR Style Filter Data: Size: 23-5/8" x 47-5/8" x 6" with exposed anodized aluminum frame and diamond pattern white epoxy face screen. The HEPA Filter with 100mm media is 145 FPM average face velocity @ initial 0.40 w.g. and 99.99% efficient @ 0.3µm.

Replacement Filters
302027 NCR Style HEPA Filter, 99.99% eff. @ 0.3 micron
302028 NCR Style ULPA Filter, 99.9995% eff. @ 0.12 micron
302029 CRF Style HEPA Filter, 99.99% eff. @ 0.3 micron
_ CRF Style ULPA Filter, 99.9995% eff. @ 0.12 micron
302197 Prefilter 20"x20"x2", 30% ASHRAE efficient, pleated type

Options: ULPA Filter, Power Cord, Duct Collar Adaptors.

EBM motors are efficient with low energy consumption.
CRI SAMlink Control System can be applied to SAM units with EBM motors.
Four seismic clips at all corners with strong seismic capacity provide stable suspension points.
Each unit can be fine tuned by Solid-state variable speed control with RFI suppression to meet air flow requirements.
Most units are UL Listed with all electrical components UL Listed or UL Recognized.
Housings are made of steel, aluminum or stainless steel with a white powder coating.

SAM 24 H.O. HIGH-OUTPUT, 2'×4', 115V, Clean Rooms International
SAM 24 H.O. HIGH-OUTPUT, 2'×4', 208-230V, Clean Rooms International
SAM 24 H.O. HIGH-OUTPUT, CRF, 2'×4', 115V, Clean Rooms International
SAM 24 H.O. HIGH-OUTPUT, CRF, 2'×4', 208-230V, Clean Rooms International
SAM 24 H.O. HIGH-OUTPUT, CRF, 2'×4', 277V, Clean Rooms International