SAM 26 SERIES, MS, 2'×6', 277V, Clean Rooms International (CAT#: STEM-C-0334-ZJF)

SAM 26 SERIES Fan Filter Unit 12602 SAM26 MS manufactured by Clean Rooms International provides clean air for cleanrooms, workstations and special applications.
SAM 26 Series Fan Filter Units are ideal for workstations, equipments or spaces with special size ceilings.
Standard Equipments: 99.99% efficient HEPA filter, prefilter, seismic clip suspension points, variable speed control with RFI suppression, housings made of 20 gauge steel with a white powder coating.
N310 motor blower: energy efficient, single-phase electric power, low watt backward curved impeller, permanent split capacitor, overlheat protection.
Final filters are protected by a white epoxy diamond pattern grille and are tested in accordance with the Institute of Environmental Sciences (IEST) and ISO standards.
A polystyrene eggcrate grille of CRF Style Units in an anodized aluminum frame can be easily open to replace the filter without removing the unit.
An integral 2-lamp high output light are mounted in the filter housing under the final filter, so fluorescent light bulbs or ballast can be easily replaced. Lights will turn on automatically while fan motor is running.
An acrylic eggcrate grille in an anodized aluminum frame can be easily open to replace the filter without removing the unit.

Size: 2×6
Voltage: 277
Motor: N310
Hz: 60
Watts: 330
Weight: 118 lbs. (54 kg.)

Replacement Filters
302120 NCR Style HEPA Filter, 99.99% eff. @ 0.3 micron
302125 NCR Style ULPA Filter, 99.9995% eff. @ 0.12 micron
302190 Prefilter 20"x20"x1", 30% ASHRAE efficient, pleated type

NCR-Style Filter Data: 90 FPM average face velocity @ initial 0.47 w.g. and 99.99% efficient @ 0.3µm. An anodized aluminum frame holds the 53mm media which is protected by a diamond pattern white epoxy coated steel grille. Remove the unit from ceilling to replace the filter and then re-install the unit.

EBM motors are efficient with low energy consumption.
CRI SAMlink Control System can be applied to SAM units with EBM motors.
Four seismic clips at all corners with strong seismic capacity provide stable suspension points.
Each unit can be fine tuned by Solid-state variable speed control with RFI suppression to meet air flow requirements.
Most units are UL Listed with all electrical components UL Listed or UL Recognized.
Housings are made of steel, aluminum or stainless steel with a white powder coating.

SAM 26 SERIES, MS, 2'×6', 115V, Clean Rooms International
SAM 26 SERIES, MS, 2'×6', 208-230V, Clean Rooms International
SAM 26 SERIES, CRF, 2'×6', 115V, Clean Rooms International
SAM 26 SERIES, CRF, 2'×6', 208-230V, Clean Rooms International
SAM 26 SERIES, CRF, 2'×6', 277V, Clean Rooms International
SAM 26 SERIES, CRF W/2-Lamps, 2'×6', 115V, Clean Rooms International
SAM 26 SERIES, CRF W/2-Lamps, 2'×6', 208-230V, Clean Rooms International
SAM 26 SERIES, CRF W/2-Lamps, 2'×6', 277V, Clean Rooms International