SAM MICROSOUND GS, 2'×2', 115V, Clean Rooms International (CAT#: STEM-C-0243-ZJF)

SAM MICROSOUND GS Fan Filter Unit 12800 SAM22 MS GS manufactured by Clean Rooms International provides clean air. Gel sealed filters make it ideal for companies in highly regulated industries.
room side Replaceable: A polystyrene eggcrate grille in an anodized aluminum frame can be easily open to replace the filter without removing the unit. Perforated stainless steel or aluminum grilles are optional.
SAM MicroSound GS units are ideal for pharmaceutical companies, medical device manufacturers and companies in highly regulated industries. The SAM GS units use gel to seal between the filter and the housing.
SAM MicroSound GS units are equipped with room side replaceable HEPA or ULPA filters.
Housings are made of steel with a white powder coating and seismic clip suspension points.
N310 motor blower: energy efficient, single-phase electric power, low watt backward curved impeller, permanent split capacitor, overheat protection.
Standard Equipments: 99.99% efficient HEPA filter, 30% ASHRAE pleated type prefilter, seismic clip suspension points, safety switch, variable speed control with RFI suppression.
Final filters are protected by a white epoxy diamond pattern grille and are tested in accordance with the Institute of Environmental Sciences (IEST) and ISO standards. Standard HEPA filters are 99.99% efficient and optional ULPA filters are 99.9995% efficient.

Style: GS
Size: 2'×2'
Voltage: 115
Motor: N310
Variable Speed Control: 703084
HEPA Filter: 302201
Weight: 68 lbs. (30.8 kg (1.8 lb.).)

Motor Data
Motor: N310
Voltage: 115
Hz: 60
Watts: 185
Running Amps: 1.6
Start-Up Amps: 4.1

Filter
Mfg. Code: 302201
Description: 2'×2' GS Style HEPA Filter, 99.99% eff. @ 0.3 micron

GS-Style Filter Data: 90 FPM average face velocity @ initial 0.47 w.g. and 99.99% efficient @ 0.3µm. An anodized aluminum frame holds the 53mm media which is protected by a diamond pattern white epoxy coated steel grille. Final filters are room side replaceable.
Access Port: This port is located in the center of the filter element face and is used for introducing an upstream challenge or measuring static pressure.
Standard Ceiling Size: All 2'×4' models are designed to fit a nominal 2'×4' ceiling grid with a 22.5"×46.5" standard opening.
Air Flow: Airflow ranges from 340 to 640 CFM for a 2'×4' unit and 220 to 340 CFM for a 2'×2' unit. At 90 FPM, CFM is nominal 510 on a 2'×4' and 220 on a 2'×2' unit respectively. Airflow for units running at 50 Hz will be about 20% less.
Sound Level: At average face velocity of 90 FPM measured 30" from face of filter, sound level is approximately 54 dba with less than 45 dba ambient sound level. The different conditions will affect the test results.

Popular Options:
Final Filters, Prefilters, Duct Collar Adapters, Grilles 1/8" Round Perforated: (40% open area), Air Conditioning Mixing Box, Pilot Light, Radial Diffuser Grille, Miscellaneous

EBM motors are efficient with low energy consumption.
CRI SAMlink Control System can be applied to SAM units with EBM motors.
Four seismic clips at all corners with strong seismic capacity provide stable suspension points.
Each unit can be fine tuned by Solid-state variable speed control with RFI suppression to meet air flow requirements.
Most units are UL Listed with all electrical components UL Listed or UL Recognized.
Housings are made of steel, aluminum or stainless steel with a white powder coating.

SAM MICROSOUND GS, 2'×2', 208-230V, Clean Rooms International
SAM MICROSOUND GS, 2'×2', 277V, Clean Rooms International
SAM MICROSOUND GS, 2'×3', 115V, Clean Rooms International
SAM MICROSOUND GS, 2'×3', 277V, Clean Rooms International
SAM MICROSOUND GS, 2'×4', 115V, Clean Rooms International
SAM MICROSOUND GS, 2'×4', 208-230V, Clean Rooms International
SAM MICROSOUND GS, 2'×4', 277V, Clean Rooms International