SAM MICROSOUND STAINLESS STEEL, GS, 2'×4', 208-230V, Clean Rooms International (CAT#: STEM-C-0299-ZJF)

SAM MICROSOUND STAINLESS STEEL Fan Filter Unit 12274 SAM24 MS GS SS manufactured by Clean Rooms International provides clean air for cleanroom applications, housings made of #304 stainless steel.
Stainless Steel SAM MicroSound Series Fan Filter Units' housings are made of #304 stainless steel with #4 brushed.
Standard Equipments: 99.99% efficient HEPA filter, 30% ASHRAE pleated type prefilter, seismic clip suspension points, safety switch, variable speed control with RFI suppression.
N310 motor blower: energy efficient, single-phase electric power, low watt backward curved impeller, permanent split capacitor, overheat protection.
NCR Style final filters are externally protected by a stainless steel frame and downstream by a stainless steel circular perforated grille.
SAM GS Fan Filter Units are room side replaceable. Final HEPA or ULPA filters inside the housing are standard GS style with anodized aluminum frame and upstream gel channel.
A circular perforated stainless steel grille and frame attached with 4 screws allows replacing the filter without removing the whole unit.
All final filters are tested in accordance with the Institute of Environmental Sciences (IEST) and ISO standards.

Style: GS
Size: 2'×4'
Voltage: 208-230
Motor: N310
Variable Speed Control: 703912
HEPA Filter: 302200
Weight: 100 lbs. (45.4 kg.)

Motor Data
Motor: N310
Voltage: 208-230
Hz: 50/60
Watts: 165
Running Amps: 0.8-0.7
Start-Up Amps: 1.5
Running amps will be less on 50Hz.
Line voltage can affect actual start-up amperage.

Filter
Mfg. Code: 302200
Description: 2'×4' GS Style HEPA Filter, 99.99% eff. @ 0.3 micron
GS Style Filter Data: Size: 20-5/8" x 44-5/8" x 3" with anodized aluminum frame, upstream gel channel and diamond pattern white epoxy face screen. The HEPA is 90 FPM average face velocity @ initial 0.47 w.g. and 99.99% efficient @ 0.3µm. An access port with removable plug is located in the center of the filter element face for introducing an upstream challenge or measuring static pressure.

EBM motors are efficient with low energy consumption.
CRI SAMlink Control System can be applied to SAM units with EBM motors.
Four seismic clips at all corners with strong seismic capacity provide stable suspension points.
Each unit can be fine tuned by Solid-state variable speed control with RFI suppression to meet air flow requirements.
Most units are UL Listed with all electrical components UL Listed or UL Recognized.
Housings are made of steel, aluminum or stainless steel with a white powder coating.

SAM MICROSOUND STAINLESS STEEL, GS, 2'×2', 115V, Clean Rooms International
SAM MICROSOUND STAINLESS STEEL, GS, 2'×2', 208-230V, Clean Rooms International
SAM MICROSOUND STAINLESS STEEL, GS, 2'×2', 277V, Clean Rooms International
SAM MICROSOUND STAINLESS STEEL, GS, 2'×4', 115V, Clean Rooms International
SAM MICROSOUND STAINLESS STEEL, GS, 2'×4', 277V, Clean Rooms International