SCIENTZ-30F (Gland Type) Gland Type Silicone Oil Heating Series Freeze Dryer, Freeze-Dried Area 0.32 ㎡, NINGBO XINZHI BIOLOGICAL TECHNOLOGY CO. LTD. (CAT#: STEM-GLE-6584-LGZ)

The equipment adopts PLC control, low-temperature silicone oil refrigerant, and repeated compressor units to make the temperature lower and the control more precise. It is used in the production of pharmaceuticals, Chinese herbal medicine extracts, health products, food and chemical products. Including normal type and gland type. It can be configured with a wide-mouth manifold, and is equipped with mobile APP and PC remote control as standard.

Freeze-dried area (㎡): 0.32
Water catch capacity (kg/batch): 6
Vial capacity: Φ12mm 1950, Φ16mm 1160, Φ22mm 615
Disk solution (L): 4.5
Layer size: length (mm) 400 width (mm) 270
Ply spacing (mm): 70
Number of layers (blocks): 3+1
Laminate temperature range (°C): -55~+60 (no load)
Cold trap minimum temperature (°C): ≤-70 (no load)
Ultimate vacuum (Pa): ≤5 (no load)
Power Kw: 4.0
Ambient temperature (°C): <25
Dimensions (mm): 1100(L)×680(W)×1240(H)
Machine weight (kg): 360
Special instructions: The size and weight of the whole machine do not include an external vacuum pump, and the height of the gland freeze dryer does not include the height of the hydraulic rod (the increased height is about 200~350mm) The gland type machine is equipped with electric heating defrosting function

Pre-freeze drying is carried out in situ, with a built-in observation window, and the drying process is intuitive and controllable.
The drying room temperature difference is ≤1°C, and the drying effect is uniform.
The temperature of the partition is adjustable and controllable. The pilot test and production process can be explored. Because the drying chamber and the cold trap are separate structures, the water trapping ability is strong and the drying time is short.
Equipped with an inflatable valve, it can flush out inert gas.
The drying room adopts aviation acrylic high-transparency transparent colorless door, and the change process of the material can be clearly observed during the freeze-drying process.
Pre-lyophilization is performed in situ, reducing the tedious operation of the drying process and realizing automation.
Embedded touch screen, PLC controller, PID adjust temperature, display freeze-drying curve and historical curve.
U disk dump data.
Equipped with uploader software, which can print and browse curves and data.

SCIENTZ-12ND (Normal Type) Bell Jar Freeze Dryer, Freeze-Dried Area 0.125 ㎡, NINGBO XINZHI BIOLOGICAL TECHNOLOGY CO. LTD. (CAT#-STEM-GLE-6567-LGZ)
Scientz-12ND (Ordinary Multi-Manifold Type) Bell Jar Freeze Dryer, Freeze-Dried Area 0.125 ㎡, NINGBO XINZHI BIOLOGICAL TECHNOLOGY CO. LTD. (CAT#-STEM-GLE-6568-LGZ)
SCIENTZ-12ND (Gland Type) Bell Jar Freeze Dryer, Freeze-Dried Area 0.08 ㎡, NINGBO XINZHI BIOLOGICAL TECHNOLOGY CO. LTD. (CAT#-STEM-GLE-6569-LGZ)
SCIENTZ-12ND (Multi-Manifold Gland Type) Bell Jar Freeze Dryer, Freeze-Dried Area 0.08 ㎡, NINGBO XINZHI BIOLOGICAL TECHNOLOGY CO. LTD. (CAT#-STEM-GLE-6570-LGZ)
SCIENTZ-18ND (Normal Type) Bell Jar Freeze Dryer, Freeze-Dried Area 0.18 ㎡, NINGBO XINZHI BIOLOGICAL TECHNOLOGY CO. LTD. (CAT#-STEM-GLE-6571-LGZ)
Scientz-18ND (Ordinary Multi-Manifold Type) Bell Jar Freeze Dryer, Freeze-Dried Area 0.18 ㎡, NINGBO XINZHI BIOLOGICAL TECHNOLOGY CO. LTD. (CAT#-STEM-GLE-6572-LGZ)