SEPARA® PES(Polyethersulfone) Syringeless Filter, Pore Size 0.20 μm, GVS Group (CAT#: STEM-FC-1492-LC)

Syringeless Filter manufactured by GVS Group consists of a device auto-sampler, filtration membrane, plug and cap/septa. This one step sample preparation device includes two parts: an internal vial with a sealed membrane and a cap with a pre-cut septa and an external vial to be filled with filtrate. The liquid is placed in the external vial and dispensed by pressing the internal vial. This pushes the liquid through the membrane. The sample is then filtered and the SEPARA is ready to be loaded in the auto-sampler.

Dimensions: 12 mm diameter x 32 mm height
Materials: Polypropylene, with PTFE and silicone septa
Fill Line Volume: 480 microliter
Filtering Capacity: 450 microliter
Dead Volume: 30 microliter
Compression Force: 8 psi (0.6 bar)
Maximum operating temperature: 50°C
Pore Size: 0.20μm
Color: Light Green
Package: 100/pk
Sterilized: No

Save money - Eliminate the need for separate syringes, syringe filters, vials and septa, reducing sample preparation costs by 50%
Save operator time - 15 seconds SEPARA® Press&Go!, against 3 minutes with conventional sample preparation methods
Speed up process with high throughput automation - Designed and compatible for use with all HPLC or UHPLC auto-samplers
Preserve precious samples - Start with less sample volume; dead volume as low as 30 microliters (μL)
Reduce risk of cross-contaminations - No cumbersome steps transferring sample between different devices
Extend column life and needle longevity - Reduce risks of clogging and back pressure build up
Increase operator security - Safer single step process
Reduce identification errors - Color-coded caps by membrane type and pore size

SEPARA® PES(Polyethersulfone) Syringeless Filter, Pore Size 0.45 μm, GVS Group (CAT#: STEM-FC-1493-LC)