SFD-E001 Orthopedic Traction Bed, 0～75±5°, SAFETY (CAT#: STEM-MF-0124-LJX)

This furniture is used for rehabilitation of orthopedic patients.

1. Four groups of rockers: Hidden design, With position lifting signs pasted on them, Making the operation clear at a glance. The position of the patient's back, Legs (split legs), And the tilt height of the entire frame can be flexibly adjusted. It adopts in-place protection devices and has a long life. Plastic handle (built-in metal insert) design, Good gripping feel, Covered with ABS plastic dust cover, Strong and flexible, No noise, Easy to operate
2. Back inclination angle: 0～75±5°, Leg inclination angle: 0～40±5°, Bed frame inclination angle (head, Foot and foot height): 0～10°
3. Bearing weight: ≥220kg; the back bed adopts a double support structure, Which is strong and solid. The double supports are stamped and formed by cold steel plates to enhance the load-bearing capacity of the back plate. The rocker has small stress and is more relaxed and flexible when rocking.
4. The side guardrail is fully covered, With a total length of 1480mm, And a height of 400mm when unfolded; D-shaped aluminum alloy handrails, Surface hardened; steel stamping base; five aluminum alloy guardrail pillars, Non-deformable, Retractable and flat, Slightly flat when retracted It is higher than the bed surface to prevent the mattress from shifting; anti-pinch design, High-strength fiberglass nylon quick positioning switch; beautiful and elegant, With anti-collision function
5. There are 4 drip stand sockets on both sides of the bed frame, And 4 drainage urine bag hooks on both sides of the bottom of the bed frame. The drip stands can be placed at the bottom of both sides of the bed frame when not in use.
6. Easily removable plastic mattress bars are installed at the end and sides of the bed to prevent the mattress from sliding and shifting when the backboard is raised and lowered.
7. The upper traction bracket has a movable and detachable structure, Which is easy to fold and assemble and does not occupy transportation space.
8. The upper traction bracket is equipped with a self-service handle to make it easier for patients to get up and move around.
9. Can realize waist and leg traction, Split-leg traction and abduction traction
10. Specifications and dimensions: length 2220mm, Width 960mm, Bed height 500mm

Equipped with infusion stand, Medical record card slot, Sundries rack, Tri-fold mattress, ABS bedside table

Stainless steel medical equipment cabinet, 0.85m*0.39m*1.8m, PINYUAN (CAT#-STEM-MF-0195-LJX)
SFD-E201B Orthopedic Traction Bed, 0~75±5°, SAFETY (CAT#-STEM-MF-0125-LJX)
SFD-902B wax block cabinet, H1520mm×W515mm×D480mm, SAFETY (CAT#-STEM-MF-0126-LJX)
SFD-902A slide cabinet (slicing cabinet), H1520mm×W515mm×D480mm, SAFETY (CAT#-STEM-MF-0127-LJX)
SFD-902C film drying cabinet, H1520mm×W515mm×D480mm, SAFETY (CAT#-STEM-MF-0128-LJX)
Medical liquid distribution cabinet, W400*D350*H600, OEKAN (CAT#-STEM-MF-0164-LJX)