Shanghai Jingqi Microbial Filter BT-STV6A, Shanghai Jingqi Instrument Co., Ltd. (CAT#: STEM-GLE-2095-YJL)

Shanghai Jingqi Microbial Filter BT-STV6A, model BT-STV6A is manufactured by Shanghai Jingqi Instrument Co., Ltd.
The BT-STV6A series of open stents adopts membrane filtration method and negative pressure suction filtration to achieve the purpose of bacterial retention. It is also equipped with a 50mm microporous membrane and an open filter (BYW-3B), which reduces the inspection cost and improves the inspection speed.
Inject the test product into the microbial limit incubator, and filter through negative pressure with the built-in vacuum pump of the tester, and trap the microorganisms in the test product on the filter membrane. Take out the filter membrane with a membrane remover, transfer it to the prepared solid medium, put the bacteria side up, and stick it flat. Cover the lid to form a closed culture box, place it in the corresponding constant temperature culture place for culture and count.

Pumping rate: 50L/min
Flow rate: ≥1200ml/min
Vacuum degree: 0.08Mpa
Filter: Six
Material: L304 stainless steel

The interception of multiple microorganisms in one sample can be carried out at the same time, and multiple samples can be carried out at the same time, which can save a lot of time.

Shanghai Jingqi Solvent Filter (Suction Filtration Unit) SF-2 (CAT#: STEM-GLE-2093-YJL)
Shanghai Jingqi Solvent Filter (Suction Filtration Unit)SF-1 (CAT#: STEM-GLE-2094-YJL)