Unlock Exclusive Discounts & Flash Sales! Click Here to Join the Deals on Every Wednesday!

Shanghai Jingqi Spray Dryer LPG-5, Shanghai Jingqi Instrument Co., Ltd. (CAT#: STEM-CC-0346-YJL)

Highlights

1. The drying speed is fast, and the specific surface of the material liquid is greatly increased after atomization. In the hot air flow, 95%-98% of the water can be evaporated instantly. The drying time is only ten to tens of seconds, which is especially suitable for drying heat-sensitive materials.
2. The obtained product is a spherical particle with uniform particle size, good fluidity, good solubility, high purity and good quality.

Cat Number: STEM-CC-0346-YJL

Application: It is most suitable for producing powder, granular or block solid products from solutions, emulsions, suspensions and plastic paste liquid raw materials.

Model: LPG-5

Add to Cart



Description

Shanghai Jingqi Spray Dryer LPG-5, model LPG-5 is manufactured by Shanghai Jingqi Instrument Co., Ltd.
Atomization drying is the most widely used process in the liquid process forming and drying industry. It is most suitable for producing powder, granular or block solid products from solutions, emulsions, suspensions and plastic paste liquid raw materials.
Overview of drying equipment, the air is filtered and heated, and enters the air distributor on the top of the dryer, and the hot air enters the drying chamber evenly in a spiral shape. The feed liquid passes through the high-speed centrifugal atomizer on the top of the tower, (rotating) sprays into very fine mist droplets, which can be dried into finished products in a very short time in contact with hot air. The finished product is continuously output from the bottom of the drying tower and the cyclone separator, and the exhaust gas is evacuated by the fan.

Specification

Customers provide technical parameters and requirements
Material name: slurry
Capacity: 5kg/h
Inlet air temperature 120~220℃
Heat source: electric heating
Drying method: spray drying
Receiving method: two-stage cyclone receiving
Material: The main tower is made of 304 stainless steel
Power supply: 380V 50Hz three-phase four-wire
Total power: 17.5kw
Dimensions: L*W*H*2.4m
Tower inner diameter: 1.0m
Straight section height: 1.2m

Features

1. The drying speed is fast, and the specific surface of the material liquid is greatly increased after atomization. In the hot air flow, 95%-98% of the water can be evaporated instantly. The drying time is only ten to tens of seconds, which is especially suitable for drying heat-sensitive materials.
2. The obtained product is a spherical particle with uniform particle size, good fluidity, good solubility, high purity and good quality.

Related Products

LRH/C Series Low Temperature Biochemical Incubator LRH-150C(A、B) (CAT#: STEM-CC-0340-YJL)
LRH/C Series Low Temperature Biochemical Incubator LRH-250C(A、B) (CAT#: STEM-CC-0341-YJL)
LRH/C Series Low Temperature Biochemical Incubator LRH-300C(A、B) (CAT#: STEM-CC-0342-YJL)
ZHP Series Constant Temperature Shaking Incubator ZHP-100 (CAT#: STEM-CC-0343-YJL)
ZHP Series Constant Temperature Shaking Incubator ZHP-160 (CAT#: STEM-CC-0344-YJL)
ZHP Series Constant Temperature Shaking Incubator ZHP-250 (CAT#: STEM-CC-0345-YJL)