Shinetek Digtor 22 C Benchtop Centrifuge (Industrial Use), 540 x 650 x 400mm, Shinetek Instruments Research Institute (CAT#: STEM-LC-3098-LGZ)

Digtor 22 C is used for separation of oil and gas, and can also be used for sedimentation and condensate analysis. The rotor can use 6-inch and 8-inch tubes and 28 finger tubes.
Maximum load capacity: 4 x100ml (8/6”); Maximum centrifugal force / speed: 2425xg / 3000RPM
Compliant with: ASTM D 91, D96, D 893, D 1796, D2273, D2709, D 2711, D 4007, D 5546, API 2542, API 2548, BS 4385, ISO 3734, ISO 9030, IP75, IP 359, NF M07 -020, DIN 51793.
Non-centrifuged state, the centrifuge tube is upright.
GRS: Extraction system (optional accessory), pre-installed

Dimensions w x d x h mm: 540 x 650 x 400
Net weight Kg:77
Voltage V:220-230
Current Hz: 50-60
Power W:1260

TFT color display, observable distance over 3m
* Display RPM/RCF, time, acceleration/deceleration digital (PCBS), with untrimmed positioning function (ULS)
* Speed control, step 10RPM/10xg
* RCF real-time display function based on actual use of the accessory.
* Countdown or countdown function, reaching the set RPM/RCF timing function to ensure the reproducibility of the experiment
* Timing is set from 1min-99h program, step 1s, with step-by-step and stop program function
* PCBS function: progressively controlled acceleration and braking system up to 175 selectable slopes, preventing homogenization of samples after separation.
* ULS function: if there is an untrim situation, it will directly display the untrim position number of the rotor.
* 40 sets of program memory with password protection function
* There are different prompt sounds and screen information prompts to display the operation of the device in real time

Heating
* Equipped with a preheating program function, which can preheat to a preset temperature after the rotor is loaded.
* Temperature template RT+5°C - 80°C, step 1°C, freely switchable between Celsius and Fahrenheit
* The temperature sensor is in the cavity, with over-temperature protection
* Internal insulation material to prevent heat loss

Safety
* Safety system for the centrifuge cover
- Automatic locking lid, mechanical double lock
- Emergency cover unlock function
- Lock cover protection during operation
- Protection against sudden drop of cover
- Sight holes in the cover for operation inspection
* If there is no balance check, it will automatically stop
* There is an Anquan protective layer between the centrifugal chamber and the shell
* The centrifuge chamber is made of stainless steel (easy to clean)
* The rotor is removable when the cover is closed
* Both rotor and adapter are autoclavable for easy installation
* Forced internal air flow can reduce temperature increase
* Energy saving setting with automatic power off option setting

Easy to use
* Microcomputer program control
* Brushless maintenance-free motor
* Rotor and adapter memory function
* Noise level, below 60dB
* With start, stop, cover opening and instantaneous centrifugation functions
* Speed can be adjusted by RPM/RCF during operation.
* It can be set to automatically open the cover through the program
* Automatically memorize the parameter setting value after Z
* Automatic rotor recognition, overspeed protection

EU certification: 2011/65/EU, 2012/19/EU, 2014/30/EU, 2014/35/EU, 98/79/EC
Executive standard: EN 61010-1, EN 61010-2-020, EN 61326-2-6, EN 61326-1, EN 61010-2-010.

Shinetek PLASMA 22 Benchtop Centrifuge (Life Science), 280 x 275 x 410mm, Shinetek Instruments Research Institute (CAT#-STEM-LC-3108-LGZ)
Shinetek Digtor 22 C-8 Benchtop Centrifuge (Industrial Use), 540 x 650 x 400mm, Shinetek Instruments Research Institute (CAT#-STEM-LC-3099-LGZ)
Shinetek Digtor 22 C-U Benchtop Centrifuge (Industrial Use), 540 x 650 x 400mm, Shinetek Instruments Research Institute (CAT#-STEM-LC-3100-LGZ)
Shinetek DIGTOR 22R Refrigerated Benchtop Centrifuge, 720 x 805 x 390mm, Shinetek Instruments Research Institute (CAT#-STEM-LC-3101-LGZ)
Shinetek DILITCEN 22 Benchtop Centrifuge, 540 x 650 x 390mm, Shinetek Instruments Research Institute (CAT#-STEM-LC-3102-LGZ)
Shinetek Lacter21 Benchtop Centrifuge (Life Science), 365 x 300 x 450mm, Shinetek Instruments Research Institute (CAT#-STEM-LC-3103-LGZ)