Shinetek YSI 2950 Biochemical Analyzer, 17.7 kg, Shinetek Instruments Research Institute (CAT#: STEM-AIAE-3408-LGZ)

YSI's new biosensor technology, biochemical analysis can get results in 60s. Using specific enzymes to act on a single target analysis, the YSI immobilized enzyme electrode brings fast, accurate, and strong anti-interference, and the analysis results can be obtained within one minute. Anti-clogging chamber fluid mechanics design, even in high-density cell liquid, it will not be blocked.

Modular design, upgrade service available, YSI 2950 series offers an intuitive graphical user interface, touch screen.

Principle
The YSI biochemical analyzer uses enzyme membrane electrometry for measurement and ammonia/potassium ions for ion electrometry

The enzyme membrane consists of three layers of material. The first layer is porous polycarbonate, which is used to limit the speed of the substrate entering the second layer (enzyme layer), thereby preventing the reaction from being restricted by the limited enzyme layer due to the excessive amount of substrate. The third layer is a cellulose film layer, which is used to filter the hydrogen peroxide to pass through and reach the electricity for measurement.

Measuring volume: user-defined 10 - 50 μL
Analysis time: 60 seconds
Accuracy: CV <2%
Alignment: Less than +/- 5% deviation from calibration line
Automatic calibration: It has automatic calibration and automatic detection functions, and will automatically detect and report errors when reagents or membrane consumables fail.
Temperature Compensation: The sensitivity of the sensor varies with temperature. A temperature sensor is included in the sample module to monitor the fluid temperature. The temperature of the sample and the temperature deviation during calibration will be compensated and corrected
Level Detection: Level sensors monitor low levels in the calibration and supply bottles and high levels in the waste bottle
Dimensions: YSI 2950: 35.6 x 52.1 x 40.0 (W x D x H cm), bottle holder 9" (22.9 cm)
Working environment: 15 - 35° C ambient temperature 10-90% relative humidity
Power Requirements: 220-240 VAC, 50-60 Hz , 50 W
Compliance with standards: CE, RoHS
Automatic operation: ≤96 samples, single-sample detection, eight-tube, 24-well plate, 96-well plate, automatic detection of various experiments, automatic data storage.
Weight: 39 lbs./17.7 kg without rack

Multi-parameter measurement
Measures >10 chemicals with results available within 1 minute each

Specific substance analysis
Specific substance analysis even in mixtures

Modular
YSI 2950 scalable for 2-6 chemical analysis

Anti-clogging chamber hydrodynamic design
No clogging even in high-density cell fluids

Shinetek YSI 2950 Biochemical Analyzer, 17.7 kg, Shinetek Instruments Research Institute (CAT#-STEM-AIAE-3408-LGZ)
Shinetek YSI 2900 Biochemical Analyzer, 220-240 VAC, Shinetek Instruments Research Institute (CAT#-STEM-AIAE-3405-LGZ)
Shinetek YSI 2900M Biochemical Analyzer, 3.0 lbs, Shinetek Instruments Research Institute (CAT#-STEM-AIAE-3406-LGZ)
Shinetek YSI 2940/2980 Multi-channel On-line Biochemical Analysis and Detection System, 7.26kg, Shinetek Instruments Research Institute (CAT#-STEM-AIAE-3407-LGZ)