Standard Connection Kit, 10 Components, Lumicks (CAT#: STEM-CV-0001-LKN)

Standard Connection Kit is manufactured by Lumicks. This product is used for u-FluxTM instrument connection. Contains the following components:
FEP tubing (1/16″ x 0.004″)
FEP tubing (1/16″ x 0.010″)
FEP tubing (1/16″ x 0.030″)
Plastic tube cutter
Shut-off valves
Ferrules
Luer adapters (M/F)
Tefzel caps
Flangeless nuts
Extender tool

FEP tubing (1/16" x 0.004"): 7.5 m – Tubing with an outer diameter of 1/16" and constant inner diameter of 0.004" to enable laminar flow.
FEP tubing (1/16" x 0.010"): 7.5 m – Tubing with an outer diameter of 1/16" and constant inner diameter of 0.010" to enable laminar flow.
FEP tubing (1/16" x 0.030"): 7.5 m – Tubing with an outer diameter of 1/16" and constant inner diameter of 0.030" to enable laminar flow.
Plastic tube cutter: 1 piece – For cutting the plastic tubing. Including 5 extra blades.
Shut-off valves: 7 pieces – For switching the flow on and off.
Ferrules: 10 pieces – Rubber seals to make a leak-free connection between the microfluidic chip and flowcell holder.
Luer adaptors (M/F): 7 pieces each – For connecting tubing.
Tefzel caps: 3 pieces – For closing syringes without a valve.
Flangeless nuts: 10 pieces – For connecting tubing with the flowcell.
Extender tool: 1 piece – For tightening the flangeless nuts.

u-FluxTM Laminar Flow Microfluidics, Lumicks (CAT#: STEM-C-0002-LKN)
Automated Fluidics Connection Kit, Lumicks (CAT#: STEM-CV-0002-LKN)
Fused Silica Connection Kit, Lumicks (CAT#: STEM-CV-0003-LKN)