Super Thin FFU, 615mm×1225mm×275mm, KLC Cleantech (CAT#: STEM-C-0199-ZJF)

Highlights

Overheating protection: Inside equipped with overheating protection, the surface is smooth and bright with low air resistance and good sound insulation. Special air entrance design effectively reduces the noise.
The average air speed increase to 25%: The average air speed increase to 25% with long-life span, low energy consumption, low noise, less maintenance, small vibration and adjustable speed.
Long-life span: It works as a stable average air speed of 0.45m/s which can shorten the period to replace filters and prolong the service life of fans.

Cat Number: STEM-C-0199-ZJF

Application: Semiconductor, electron, flat-panel display, disc-drive, manufacture and optics, bio-engineering, clean bench, clean room, or any other places.

Model: FUST-4

Add to Cart

Description Specification Features Related Products

Description

Super Thin FFU FUST-4 with super thin motor inside manufactured by KLC Cleantech provides continuous application for the turbulent layer and laminar flow clean room with limited installation space, with the wind speed up to 0.45m/s ±20%.
It is 100mm thinner than the ordinary FFU, lighter with easy and beautiful design.
Stainless steel, galvanized steel with aluminum painting, gold rolled steel with epoxy powder and others can be selected as its cabinet material, highly resistant to corrosion and rust.

Specification

Size (W×L×H mm): 615×1225×275
Air chamber material: Galvalume / aluminum / stainless steel
Air Flow (m³/h): 1100~1200
Air velocity (m/s): 0.35~0.55
Total pressure (Pa): 230
Power (W): 100
Weight (kg): 37.5
Noise dB (1m below the HEPA filter): 55~63
Vibration (mm/s): 0.2~0.7
Power supply: 220V 1PH 50/60Hz (330V 3PH 50/60Hz 110V 1PH 50/60Hz)
Control mode: 3 levels adjustable manually or group control by computer
Options: DOP inject port / DOP sample port / differential pressure drop test port /differential pressure drop alarm device

HEPA filter
Size (W×H×Dmm): 610×1220×69
Efficiency: 99.99% 0.3μm
Frame: High quality anodized aluminum
Initial pressure drop: 110Pa@0.45m/s±15%
Trait: PU foam endless gasket

Features

Related Products

Super Thin FFU, 575mm×875mm×275mm, KLC Cleantech
Super Thin FFU, 920mm×615mm×275mm, KLC Cleantech
Super Thin FFU, 575mm×1175mm×275mm, KLC Cleantech

Other recommended products

MAC 10® LEAC2 Fan Filter Unit, 2'×2', 277 V, 555 ft³/min, Envirco (CAT#: STEM-C-0418-ZJF)
HEPA Fan Filter Unit, 1175x575x350 mm, Suzhou Huajing (CAT#: STEM-C-0908-ZJF)
SAM RF REVERSE FLOW, GS, 2'×2', 277V, Clean Rooms International (CAT#: STEM-C-0317-ZJF)
HEPA Filter FFU, 610x610x270 mm, Dongguan Senbao (CAT#: STEM-C-1124-ZJF)
MAC 10® IQ LAF Fan Filter Unit, 2'×4', RSR/RSRE/RSRC, Envirco (CAT#: STEM-C-0446-ZJF)
Fan Filter Unit, 575×1175×300 mm, AC, Suzhou Meidi Clean (CAT#: STEM-C-0953-ZJF)
Vertical Flow Fan Filter Unit CAP116, 5T36, Clean Air Products (CAT#: STEM-C-0224-ZJF)
Fan Filter Unit, 575x1175x230 mm, KeLing Purification (CAT#: STEM-C-1214-ZJF)