SuperCELL™ Arelco Synder SuperCELL, 7.1 Sq. Ft, Synder Filtration (CAT#: STEM-GMAE-3090-LGZ)

Synder filter has been producing anode cells and anolyte circulation systems for the E-Coat industry since 1996 and proudly serves most of the major automotive companies worldwide. Synder is able to manufacture anode cells of various sizes and orientations, such as horizontal roof cells, horizontal floor cells, vertical side cells, and bare anodes. Anode structures are available in SS316 stainless steel, as well as ruthenium oxide and iridium oxide coated titanium for greater current density. To better control membrane formation and record current per anode cell, Synder also offers a Current Monitoring System (CMS) that records data on a remote computer for historical analysis in a highly economical way.
Electrophoretic paint (E-Coat) is the base layer of paint applied to most vehicles, providing corrosion resistance and physical durability. Anode cells (also known as anodic cells and electrodialysis cells) perform a dual role in the electrocoating process: they act as counter electrodes for the car body and remove excess acid produced in the paint bath during electrophoresis.
Compared to flat-panel cells, both TechCELLS and SuperCELLs offer a wider range of electronic "throw angles" that can significantly improve coating quality and coverage in hard-to-reach areas involving parts with more complex geometries. Caution should always be used when increasing the voltage to provide greater throwing force to prevent rupture of the membrane. Synder currently offers open and closed top 1.5" and 2" units, as well as floor and bottom units, which can be customized to fit nearly any tank depth and work pack size.
SuperCELL™ is a heavy duty, light weight, single piece C-Cell anode cell designed for optimal paint coverage of large electrocoat tanks. The efficiency and performance of SuperCELL™ is very high, 100% of the battery is facing the work, and it is the most economical choice for large-capacity paint tanks. Semicircular anode and membrane. Lifting and connecting to power cables is convenient. The weight is less than 1/3 of the standard flat-panel battery. There is no welding below the anolyte, preventing failures due to buried mechanical or welded connections. Made from 10 gauge or 3/16" thick 316L stainless steel.

Minimum Output: 23 amps
Maximum Output: 44 amps
Output Coulombs (in 40 seconds): 1358
Average Output (per sq. ft/min): 287 coulombs
Average Distance of Effective Coating: 20.6 ft

1. Low operating cost. Compared to box-type batteries, with a 70% increase in amperage per square foot, followed by a 50% savings in power usage, operating costs are significantly reduced.
2. Coverage is better. In a monorail system, more throw angles mean more coverage and longer paint times.
3. It is easy to use and maintain. Heavy-duty, light-weight and in one piece, able to ensure easy lifting and simple power cable connection.
4. The flexibility of the tank. Four different sizes are available, including a low profile option for tanks with limited clearance for sections and tank walls.

TechCELL™ Anode Cells For E-Coat: Tubular & Semi-Circular, Synder Filtration(CAT#-STEM-GMAE-3088-LGZ)
SuperCELL™ Standard Flat Cell, 16 Sq. Ft, Synder Filtration(CAT#-STEM-GMAE-3089-LGZ)