Tissue Tek VIP 5AF1 Tissue Processor, 115 VOLTS, Tissue Tek (CAT#: STEM-LAPO-0643-LJX)

The Sakura Tissue-Tek® VIP® Series are reliable tissue processors with a retort capacity of 100 specimens for the Tissue-Tek® VIP® 1000, 200 specimens for the Tissue-Tek® VIP® 2000, and 300 specimens for the Tissue-Tek® VIP® 3000. With a sophisticated micro-processor, the VIP® control panel permits the user to prepare and store up to 10 different processing programs at the touch a key.

The user friendly Sakura Tissue-Tek® VIP® tissue processors are not only designed for maximum reliability, but they also ensure the ultimate safety of your specimens. The computer monitors the entire process to continuously maintain all parameters under virtually any circumstances. Even in the event of power failure, the system will protect the integrity of your specimens.

Benchtop and compact, the Tissue-Tek® VIP® processors combine four key elements to produce a better block: alternating pressure, vacuum, heat, and agitation. These elements are programmable in each of 10 reagent and 4 paraffin stations. The Sakura Tissue-Tek® Series provides pre-programming of the 14 stage processing cycle, cleaning cycle, the P/V cycle and diagnostic systems. The operator may create and store up to 10 processing programs detailing time, heat, and P/V cycle at each station.

Condition: Used
CE Marked: YES
Voltage: 115 VOLTS
Frequency: 50/60 HERTZ
Phase: 1
Dimensions: Standard
Overall: 26 x 24 x 54 IN - 373 LBS

Store up to 10 different processing programs
Retort capacity of 100, 200, or 300 specimens (depending on model)
Available in bench-top or floor models
Pre-programmed cleaning cycle, P/V cycle, and diagnostic systems
Programmable 14 stage processing cycle

BioMerieux BacT Alert 3D Bacterial Detector System, 100/240 VOLTS, BioMerieux (CAT#-STEM-LAPO-0651-LJX)
Perkin Elmer DSC 8500 Differential Scanning Calorimeter, 100-240 VOLTS, Perkin Elmer (CAT#-STEM-LAPO-0645-LJX)
Setra Micro-Cal Model 869 Ultra Low Pressure Calibrator, 14 x 14 x 8 IN - 20 Pounds, Setra (CAT#-STEM-LAPO-0647-LJX)
Fluke 744 Documenting Process Calibrator, 120 VOLTS, Fluke (CAT#-STEM-LAPO-0648-LJX)
YD-8000 Optical Digital Measure System, 80-264 VOLTS, Unknown (CAT#-STEM-LAPO-0649-LJX)
2 BTX HT200 Electroporation System, 115 VOLTS, BTX (CAT#-STEM-LAPO-0650-LJX)